Crestron D3 PRO Reference Manual page 75

™
Crestron D3 Pro
Reference Guide – DOC. 5998a
closes the Edit Step dialog.)
Once you have defined the expression, you can define the actions that will be
triggered if the test expression results in true.
1. Double-click the red text, which should be positioned directly below the If
clause and indented. If the red text appears in any other position, click the
icon to move it to the correct position. Alternatively, click the New Step
button on the Edit Step dialog if you didn't close the dialog.
2. Select the target device and command, just as described earlier in this
Programming View section.
As shown below, the "Drapes Close" command is in the indented position
directly below the If clause, signifying that it is part of the conditional
statement and not an "independent" command.
3. The optional Else clause allows you to trigger actions if the test expression
results in false. Again, if you exited the Edit Step dialog, you must first
verify that the red text is in the correct position below the Else statement, and
double-click the red text to re-open the Edit Step dialog. In the example
below, the Else command (Drapes Open) would be triggered if the
expression "Chandeliers.Current Level > 50%" results in false.
Software
Crestron D3 Pro™• 71