Crestron D3 PRO Reference Manual page 73

™
Crestron D3 Pro
Reference Guide – DOC. 5998a
Expressions can consist of the following elements:
Logical operators
< (less than)
> (greater than)
= (equal to)
<> (not equal to)
<= (less than or equal to)
>= (greater than or equal to)
Global Variables
e.g., FrontGateStatus
Device Outputs
e.g., Bedroom Downlights On; or
Dining Room Pendant Level (greater than 50%)
Conditional steps are not allowed within synchronized events. Adding a conditional
step will warn you that doing so will turn off synchronization for the entire button.
To define a conditional statement
1. Select the event you want to program. For example, if you want to program a
Toggle button's Press 1 event, click the Press 1 tab.
2. Double click the red text to open the Edit Step dialog and click Conditional
to set the condition to be tested (also called an If clause).
3. Select the target device, and then select the value you want to test.
Depending on the device, you can select a digital value such as On or Off, or
Software
Crestron D3 Pro™• 69