Crestron D3 PRO Reference Manual page 37

™
Crestron D3 Pro
Reference Guide – DOC. 5998a
When you click Next, the Finish screen will show the module and enclosure
assignments the Wizard will make. To keep these changes click Finish. Note that this
will overwrite all enclosure assignments and control module connections that were
previously added.
Once the Wizard completes the module and enclosure assignments you can select any
of the components in the system directory on the left side of the screen. This will
display different information depending on what is selected. If you select an
enclosure, a graphic of the enclosure will be displayed in the center of the screen. If
you select a module you will see the output connections.
Software
Crestron D3 Pro™• 33