Crestron D3 PRO Reference Manual page 91

™
Crestron D3 Pro
Reference Guide – DOC. 5998a
"Setup a new system", which allows you to discard any current configuration and set
new Cresnet IDs for all devices; or
"Skip to advanced setup", which allows you to bypass the step-by-step approach of
the first two choices and brings you directly to a graphical drag-and-drop
configuration screen. (Note that the other two options will eventually bring you to
this screen as well).
Make your selection and click Next. This will cause D3 Pro to poll the network and
display a progress bar during polling. (If you select Setup a new system then you
must first confirm that any existing network configuration should be deleted.)
After polling, the Wizard will display different screens depending on the
configuration option you selected. If you select the advanced setup, the Wizard will
open the configuration screens for touch-settable devices, as described in Step 5.
If you select Change the current system, the Wizard will display the list of devices
that have already been configured. The information here includes the configured
Cresnet ID of the device, the name and type of device, and its serial number. (If you
selected Setup a new system you will not see this list.)
Software
Crestron D3 Pro™• 87