Crestron D3 PRO Reference Manual page 93

™
Crestron D3 Pro
Reference Guide – DOC. 5998a
The Assign Device Network IDs screen displays a number of windows that give
information about devices in the program, as well as the devices currently detected
on the network.
The Unassigned devices in the program list at the top left displays all devices that
have been defined in the program, including non touch-settable devices. The
information here includes the Cresnet ID of the device (meaning the ID assigned in
the program, not the internal Cresnet ID) the name and type of device, the type count,
and its location.
The Type Count gives the number of devices of that type that have been defined in
the program. Type counts that appear in red indicate a discrepancy between the
number of a certain type of device in the program vs. what is detected on the
network, i.e., you have 4 C2N-DB12s in the program, but only 3 are showing up on
the network.
Software
Crestron D3 Pro™• 89