Software
64 • Crestron D3 Pro™
You can paste logic to another button by right-clicking the button and selecting Paste
Button Logic on the submenu.
To copy and paste individual steps, right-click the command and select the desired
operation from the submenu. You can cut, copy and paste the command to a different
event, or you can delete the command.
To work with all the defined steps for an event, right-click a blank area of the event
tab. In the example below, you could cut, copy or delete all the steps in the list.
Crestron D3 Pro
Reference Guide – DOC. 5998a
™