Table of Contents
Advertisement
The Four Opening Menu Functions
STATUS
CONFIG
61200060L1-1
The opening menu is the access point to all other operations.
There are four main menu items,
,
. Each main menu item has several
3)UTILITY
4)TEST
functions and submenus to identify and access specific
parameters. In the discussions that follow, each main menu
contains a complete menu diagram to identify the location of
each operation.
The Status menu provides the ability to view the status of the
TSU operation. This menu includes the following sub-items.
NI PERF RPTS
Used to view the user's set of data on the Network Interface
Performance Reports in compliance with ANSI T1.403 and
AT&T Document TR54016.
CURR ERR/ALM
Used to view current errors/alarms which are being reported
by the TSU.
ERR/ALM HIST
Used to view and clear history errors and alarms.
The Configuration menu is used to set the TSU's operational
configuration. This menu includes the following sub-items.
NETWORK (NI)
Used to set all of the parameters associated with the network
interface.
UNIT
Used to control TSU's control port baud rate and to setup the
dial out function.
PORT
Used to configure the parameters associated with the V.35
port.
TSU User Manual
Chapter 3. Operation
,
1)STATUS
2)CONFIGURE
,
3-7
Advertisement
Table of Contents
