Table of Contents
Advertisement
FCC regulations require that the following information be provided to the
customer in this manual.
1.
This equipment complies with Part 68 of the FCC rules. The required
label is affixed to the bottom of the chassis.
2. If your telephone equipment causes harm to the telephone network, the
Telephone Company may discontinue your service temporarily. If pos-
sible, they will notify you in advance. But if advance notice isn't practi-
cal, you will be notified as soon as possible. You will be advised of your
right to file a complaint with the FCC.
3. Your telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the proper operation of your
equipment. If they do, you will be given advance notice so as to give
you an opportunity maintain uninterrupted service.
4. If you experience trouble with this equipment, please contact Adtran at
888-4Adtran for repair/warranty information. The telephone company
may ask you to disconnect this equipment from the network until the
problem has been corrected, or until you are sure the equipment is not
malfunctioning.
5. This unit contains no user-serviceable parts.
6. An FCC compliant telephone cord and modular plug is provided with
this equipment. This equipment is designed to be connected the tele-
phone network or premises wiring using a compatible modular jack
which is Part 68 compliant. See installation instructions for details.
7. The following information may be required when applying to your
local telephone company for leased-line facilities.
Service
1.544 Mbps - SF
1.544 Mbps - SF and B8ZS
1.544 Mbps - ESF
1.544 Mbps - ESF and B8ZS
iv
REN/SOC FIC
6.0/F
04DU9-BN
6.0/F
04DU9-DN
6.0/F
04DU9-1KN RJ48C
6.0/F
04DU9-1SN RJ48C
USOC
RJ48C
RJ48C
Advertisement
Table of Contents
