Crestron CNLDAB-4A Datasheet

Crestron CNLDAB-4A
CRESNET COLORS:
24: RED
Y: WHITE
Z: BLUE
G: BLACK
TO CRESNET SYSTEM
(REFER TO LATEST NETWORK
INTERCONNECT DRAWING DOC. 5411)
MAXIMUM LOAD PER CIRCUIT: 16 AMPS
MODULE REQUIRES ONE SPACE IN A CSTC-SERIES CABINET
MODULE REQUIRES TWO SPACES IN A CLC-SERIES CABINET
NOTE: THIS PRODUCT CAN ALSO BE USED FOR SWITCHING NON-DIMMABLE BALLASTS ON AND OFF.
HOWEVER, NOTE THAT THIS PRODUCT USES ELECTRO-MECHANICAL RELAYS FOR SWITCHING
THE AC POWER TO THE LOADS, AND CERTAIN ELCTRONIC BALLASTS HAVE VERY HIGH INRUSH
CURRENTS WHICH MAKE THEM INCOMPATIBLE WITH ELECTRO-MECHANICAL RELAYS. CHECK
WITH BALLAST MANUFACTURER FOR COMPATIBILITY.
This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc.
Crestron Electronics, Inc.
15 Volvo Drive, Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
4-Channel Fluorescent Dimmer Module
(TO OUTPUTS 1, 2, 3, OR 4)
LOW VOLTAGE CLASS 2 WIRING
(REFER TO ADVANCE BALLAST DATA SHEET FOR DETAILS)
(E103692)
120 VAC OR 277 VAC
CIRCUIT BREAKER
NEUTRAL
ADVANCE
MARK VII
120V OR 277V
BALLAST
GRY (TO G)
VIO
Specifications subject to
change without notice.
DOC. 5661A
(2009617)
06.06