Activation; Navigation; Valve Test - HydroPoint WeatherTRAK ET Pro3 2-Wire Getting Started Manual

Activation

In order to receive daily weather updates, your controller
must be activated. To activate, call HydroPoint
Customer Service at (800) 362-8774.
For a faster call, complete the blue activation card
inside the controller before calling HydroPoint
Customer Service.
Controllers can also be activated on our
website at hydropoint.com.

Navigation

The user interface incorporates five main functions:
1. The display
2. The menu buttons
3. The left and right
4. The plus and minus
5. The button
Figure 13
Controller Front Panel
Pushing the or arrow buttons allows you to scroll through
all of the sub-functions within a menu.
Pushing the or buttons allows you to select choices for
each sub- function.
Pressing and holding the
within the SETUP, STATIONS, FLOW and MANUAL menus will
display additional information.
In the COPY menu the button executes the "copy" function.
© 2019 HydroPoint Data Systems, Inc. All rights reserved.
arrow buttons
buttons
button in some limited sub-menus
WeatherTRAK ET Pro3 2-Wire Installation Instructions
Call Customer Service
1-800-362-8774

Valve Test

To ensure all field wiring is properly connected and all stations
are operating properly conduct a field wire integrity test.
Step 1. Press the MANUAL TEST button.
Step 2. Press the minus
displays.
Step 3. Press the right arrow
screen displays:
RUN VALVE TEST — RTVT:OFF
00 SH 00 NC Faults
Step 4. Press the SELECT button, then press the
start the test. It will take about 15 seconds to verify
continuity to all stations and the master valve.
Step 5. If any field wiring issues exist, they will be identified
as a "Fault". A valve fault could be "SH" (valve short)
from a failing solenoid OC (over current) from valves
drawing more than 1000 mA or an "NC" (valve no-
connect or open) reflecting a broken wire or wire that
is not making good contact in the corresponding
station terminal.
Free online training is available at:
hydropoint.com/training-support
Visit hydropoint.com or
access and print additional copies of this Installation
Guide.
5
Help?
button until the Valve Test screen
button until the following
button to
support@hydropoint.com
800.362.8774 • hydropoint.com
to