When To Replace Tires; Spare Tire And Tools - Hyundai Coupe Tiburon 2005 Owner's Manual

8
CONSUMER INFORMATION
6
I090A01S-GAT

WHEN TO REPLACE TIRES

1.6 mm (0.06 in.)
Wear indicator
HGK5015
The original tires on your car have
tread wear indicators. The tread wear
indicators appear when the tread
depth is 1.6 mm (0.06 in.). The tire
should be replaced when these ap-
pear as a solid bar across two or
more grooves of the tread. Always
replace your tires with those of the
recommended size. If you change
wheels, the new wheel's rim width
and offset must meet Hyundai speci-
fications.
!
WARNING:
o Driving on worn-out tires is dan-
gerous! Worn-out tires can
cause loss of braking effective-
ness, steering control and trac-
tion. When replacing tires, never
mix radial and bias-ply tires on
the same car. If you replace ra-
dial tires with bias-ply tires, they
must be installed in sets of four.
o Using tires and wheels of other
than the recommended sizes
may cause unusual handling
characteristics that may cause
death, serious injury or prop-
erty damage.

SPARE TIRE AND TOOLS

I100A01FC-GAT
HGK4008
Your Hyundai is delivered with the
following:
Spare tire and wheel
Wheel nut wrench, Wrench bar, Span-
ner, Screwdriver
Jack