Hyundai Coupe Tiburon 2005 Owner's Manual page 314

B260N01GK-EAT
Malfunction Indicator
Lamp
This lamp illuminates when there is a
malfunction of an exhaust gas related
component, and the system is not
functioning properly so that the ex-
haust gas regulation values are not
satisfied. This lamp will also illuminate
when the ignition key is turned to the
"ON" position, and will go out after
engine starting. If it illuminates while
driving, or does not illuminate when
the ignition key is turned to the "ON"
position, take your car to your nearest
Hyundai authorised repairer and have
the system checked.
B260E01HP-GAT
Seat Belt Warning Light
The seat belt warning light blinks for
about 6 seconds when the ignition key
is turned from the "OFF" position to
"ON" or "START".
gkfluk-1a.p65 43
B260Q01E-EAT
Cruise Indicator
(Not all models)
The cruise indicator light in the instru-
ment cluster is illuminated when the
cruise control main switch on the end
of the barrel is pushed.
The indicator light does not illuminate
when the cruise control main switch is
pushed a second time.
Information about the use of cruise
control is beginning on page 1-48.
B260R01E-EAT
CRUISE SET Indicator
Light (Not all models)
The set indicator light in the instrument
cluster is illuminated when the cruise
control switch is pushed downward to
"SET (COAST)".
The set indicator light does not illumi-
nate when the control switch is in the
"CANCEL" position.
11/21/2005, 2:56 PM
CONTROLS AND EQUIPMENT
B265C01LZ-EAT
Electronic Stability
Program Indicator Lights
(Not all models)
The electronic stability program indi-
cators change operation according to
the ignition switch position and whether
the system is in operation or not.
They will illuminate when the ignition
key is turned to the "ON" position, but
should go out after three seconds. If
the ESP or ESP-OFF indicator stays
on, take your car to your Hyundai
authorised repairer and have the sys-
tem checked. See section 2 for more
information about the ESP.
B260U01TB-EAT
Immobiliser Warning
Light (Not all models)
This indicator light comes on for some
seconds after the ignition key is turned
to the "ON" position. At this time, you
can start the engine. The light goes out
after the engine is running. In case this
light goes out before you start the
engine, you must turn to the "LOCK"
position and restart the engine. In case
1
43