When To Replace Tires; Spare Tire And Tools - Hyundai 2004 Santa Fe Owner's Manual

Hyundai 2004 santa fe
Hide thumbs Also See for 2004 Santa Fe:
Table of Contents

Advertisement

I090A01A-AAT

WHEN TO REPLACE TIRES

0.06 in. (1.6 mm)
Wear indicator
The original tires on your car have tread wear
indicators. The tread wear indicators appear
when the tread depth is 0.06 in. (1.6 mm). The
tire should be replaced when these appear as
a solid bar across two or more grooves of the
tread. Always replace your tires with those of
the recommended size. If you change wheels,
the new wheel's rim width and offset must meet
Hyundai specification.
smhma-8.p65
5
!
WARNING:
o Driving on worn-out tires is dangerous!
Worn-out tires can cause loss of braking
effectiveness, steering control and trac-
tion. When replacing tires, never mix
radial and bias ply tires on the same car.
If you replace radial tires with bias-ply
tires, they must be installed in sets of
four.
o Using tires and wheels of other than the
recommended sizes could cause un-
usual handling characteristics that could
cause death, serious injury, or property
damage.
HGK248
o Wheels that do not meet Hyundai's di-
mensional specifications may fit poorly
and result in damage to the vehicle,
including broken wheel studs.
CONSUMER INFORMATION & REPORTING SAFETY DEFECTS

SPARE TIRE AND TOOLS

I100A02E-AAT
Your Hyundai is delivered with the following:
Spare tire and wheel
Wheel nut wrench, Wrench bar
Jack
I110A01A-AAT
SHOP MANUAL
A Hyundai Shop Manual is available from your
authorized Hyundai dealer. It's written for pro-
fessional technicians, but is simple enough for
most mechanically-inclined owners to under-
stand.
9/19/03, 9:06 AM
8
5
D060B01O

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Santa fe 2004

Table of Contents