Hyundai Coupe Tiburon 2005 Owner's Manual page 111

Table of Contents

Advertisement

H240B02A-GAT
1. POWER ON-OFF Control
Knob
The radio unit may be operated when
the ignition key is in the "ACC" or "ON"
position. Press the knob to switch the
power on. The LCD shows the radio
frequency in the radio mode or the tape
direction indicator in the tape mode. To
switch the power off, press the knob
again.
VOLUME Control
Rotate the knob clockwise to increase
the volume and turn the knob counter-
clockwise to reduce the volume.
2. BASS Control Knob
Press to pop the knob out and turn to
the left or right for the desired bass
tone.
BAL (Balance Control) Knob
Pull the bass control knob further out.
Turn the control knob clockwise to
emphasize right speaker sound (left
speaker sound will be attenuated).
When the control knob is turned coun-
terclockwise, left speaker sound will be
emphasized (right speaker sound will
be attenuated).
3. TREB (Treble Control) Knob
Press to pop the knob out and turn to
the left or right for the desired treble
tone.
FAD (Fader Control) Knob
Pull the treble control knob further out.
Turn the control knob counterclockwise
to emphasize front speaker sound (rear
speaker sound will be attenuated).
When the control knob is turned clock-
wise, rear speaker sound will be em-
phasized (front speaker sound will be
attenuated).
4. TUNE (Manual) Select Button
Press the
side or
side to increase
or to decrease the frequency. Press
either button and hold down to continu-
ously scroll. Release button once the
desired station is reached.
FEATURES OF YOUR HYUNDAI
SEEK Operation
(Automatic Channel Selection)
Press the TUNE select button 1 sec or
more.Releasing it will automatically tune
to the next available station with a beep
sound.
When the side is pressed longer than
1 second, releasing will automatically
tune to the next higher frequency and
when the
side is pressed longer than
1 second, releasing will automatically
tune to the next lower frequency.
5. BAND Selector
Pressing the
button changes the
FM/AM
AM, FM1 and FM2 bands. The mode
selected is displayed on LCD.
6. PRESET STATION SELECT
Button
Six (6) stations for AM, FM1 and FM2
respectively can be preset in the elec-
tronic memory circuit on this unit.
1
97

Advertisement

Table of Contents
loading

Table of Contents