Hyundai Coupe Tiburon 2005 Owner's Manual page 291

1
CONTROLS AND EQUIPMENT
20
SB090H1-E
CARE OF SEAT BELTS
Seat belt assemblies must never be
disassembled or modified in any way.
In addition, care should be exercised
to ensure that the belt assemblies do
not become damaged by being trapped
in seat mechanisms, door shuts etc.
SB090I-E
Periodic Inspection
It is recommended that all seat belts
be inspected periodically for wear or
damage of any kind. Parts of the sys-
tem that are damaged should be re-
placed as soon as possible. Under no
circumstances must any part of the
seat belt assemblies be dismantled or
repaired.
gkfluk-1a.p65 20
SB090J1-E
Keep Belts Clean and Dry
Seat belts should be kept clean and
dry. If belts become dirty, they can be
cleaned using a mild soap solution and
warm water. Bleach, dye, strong de-
tergents or abrasives should not be
used since the fabric may become
damaged and weakened.
SB090K1-E
Replacement of Seat Belts
The entire seat belt assembly or as-
semblies should be replaced if the
vehicle has been involved in an acci-
dent even if no damage is evident.
Additional questions concerning seat
belt operation should be directed to a
Hyundai authorised repairer.
11/21/2005, 2:56 PM
B170A04A-EAT
HEIGHT ADJUSTABLE FRONT
SEAT SHOULDER BELT (Not all
models)
HGK2038
You can adjust the height of the shoul-
der belt anchor to one of the 4 posi-
tions.
If the height of the adjusting seat belt is
too near your neck, you will not be
getting the most effective protection.
The shoulder portion should be ad-
justed so that it lies across your chest
and midway over your shoulder near-
est the door and not your neck.