Hyundai Coupe Tiburon 2005 Owner's Manual page 356

B970C02E-AAT
Automatic Operation
HGK2106
The FATC (Full Automatic Tempera-
ture Control) system automatically con-
trols heating and cooling as follows:
1. Push the "AUTO" switch. The indi-
cator light will come on confirming
that the Face, Floor and/or Bi-Level
modes as well as the blower speed
and, air conditioner will be controlled
automatically.
gkfluk-1b.p65 85
HGK2103
2. Push the "TEMP" button to set the
desired temperature.
The temperature will increase to the
maximum 90°F(32°C) by pushing on
the button. Each push of the button
will cause the temperature to in-
crease by 1°F(0.5°C).
The temperature will decrease to the
minimum 62°F(17°C) by pushing on
the button. Each push of the button
will cause the temperature to de-
crease by 1°F(0.5°C).
11/21/2005, 3:02 PM
FEATURES OF YOUR HYUNDAI
NOTE:
If the battery has been discharged or
disconnected, the temperature mode
will reset as centigrade degrees.
This is a normal condition and you
can change the temperature mode
from centigrade to farenheit as fol-
lows;
Press the TEMP button down 3 sec-
onds or more with the OUTSIDE button
TEMP
held down. The display shows that
the unit of temperature is adjusted to
contigrade or fahrenheit.
(°C → → → → → °F or °F → → → → → °C)
1
85