Hyundai Coupe Tiburon 2005 Owner's Manual page 117

7. PRESET STATION SELECT
Button
Six (6) stations for AM, FM1 or FM2
respectively can be preset in the elec-
tronic memory circuit on this unit.
HOW TO PRESET STATIONS
Six AM and twelve FM stations may be
programmed into the memory of the
radio. Then, by simply pressing the
band select button and/or one of the six
station select buttons, you may recall
any of these stations instantly. To pro-
gram the stations, follow these steps:
o Press band selector to set the band
for AM, FM1 or FM2.
o Select the desired station to be stored
by seek, scan or manual tuning.
o Determine the preset station select
button you wish to use to access that
station.
o Press the station select button for
more than two seconds. A select
button indicator will show in the dis-
play indicating which select button
you have depressed. The frequency
display will flash after it has been
stored into the memory.
You should then release the button,
and proceed to program the next
desired station. A total of 18 stations
can be programmed by selecting one
AM and two FM stations per button.
o When completed, any preset station
may be recalled by selecting AM,
FM1 or FM2 band and the appropri-
ate station button.
!
CAUTION:
o Do not place beverages close to
the audio system. The audio sys-
tem mechanism may be damaged
if you spill them.
o Do not impact on the audio sys-
tem, or the audio system mecha-
nism could be damaged.
1
FEATURES OF YOUR HYUNDAI
103