Hyundai Coupe Tiburon 2005 Owner's Manual page 358

Table of Contents

Advertisement

B980B01Y-AAT
Fan Speed Control Switch
HGK2104
The fan speed can be set to the desired
speed by pressing the appropriate fan
speed control button. The higher the fan
speed is, the more air is delivered.
Pressing the "OFF" button turns off the
fan.
gkfluk-1b.p65
87
B670C01GK-EAT
Air Intake Control Switch
(Without A.Q.S)
HGK2110-1
This is used to select fresh outside air
or recirculation inside air.
To change the air intake control mode,
(Fresh mode, Recirculation mode) push
the control button.
FRESH MODE (
) : The indicator
light on the button goes on when the air
intake control is fresh mode.
RECIRCULATION MODE (
) : The
indicator light on the button is illumi-
nated when the air intake control is
recirculation mode.
11/21/2005, 3:03 PM
FEATURES OF YOUR HYUNDAI
With the "Fresh" mode selected, air
enters the vehicle from the outside and
is heated or cooled according to the
function selected.
With the "Recirculation" mode selected,
and air from within the passenger com-
partment will be drawn through the heat-
ing system and heated or cooled ac-
cording to the function selected.
NOTE:
It should be noted that prolonged
operation of the heating system in
"recirculation" mode will give rise to
fogging of the windscreen and side
windows and the air within the pas-
senger compartment will become
stale. In addition, prolonged use of
the air conditioning with the "Recir-
culation" mode selected may result
in the air within the passenger com-
partment becoming excessively dry.
1
87

Advertisement

Table of Contents
loading

Table of Contents