Table of Contents
Advertisement
Crestron C2VEQ-4
Operations & Installation Guide - DOC. 6136
Volume/Equalizer Control Expansion Card
Specifications
The following table provides specifications for the C2VEQ-4.
C2VEQ-4 Specifications
SPECIFICATION
Power Requirements
Control System Update Files
2-Series Control System Update File
Input Channels (labeled 1 – 4)
Output Channels (labeled 1 – 4)
Volume (per channel)
Mute (per channel)
Tone (per channel)
Frequency response
Total harmonic distortion (THD)
+ Noise
S/N ratio
Crosstalk
Common mode rejection
Input level (max.)
Input impedance
Output level
Output impedance
Environmental temperature
Humidity
Dimensions
Weight
1
Crestron 2-Series control systems include the AV2 with CAGE2, PAC2, PRO2, and RACK2.
2
Filenames for 2-Series control system update files have a CUZ extension and can be obtained from
the Downloads | Software Updates section of the Crestron website (www.crestron.com). Refer to
note after this footnote.
NOTE: Crestron software and any files on the website are for Authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
Physical Description
The C2VEQ-4 is a circuit board fastened to an aluminum faceplate. The card is
manufactured to easily fit in an unoccupied Y-bus slot of a Crestron 2-Series control
system.
Volume/Equalizer Control Expansion Card: C2VEQ-4 • 3
8.0 Watts
1, 2
Version 3.083.CUZ or later
Two 5-pin mini-connectors: two channels plus ground
per connector.
Two 5-pin mini-connectors: two channels plus ground
per connector.
-80dB to +20dB, 0.5dB control step [balanced I/O]
> -100dB
Bass gain range
Bass step size
Treble gain range
Treble step size
±0.1dB 20-22kHz
±0.5dB 10Hz-30kHz
<0.008% @1kHz
20 to 22kHz A-weighted
>97dB balanced, >95dB unbalanced,
20 to 22kHz A-weighted
> -90dB 20Hz-22kHz
> 90dB 20Hz-22kHz
4Vrms balanced, 2Vrms single-ended
10K ohms balanced, 5K ohm single ended
4Vrms balanced, 2Vrms single-ended
200 ohms balanced, 100 ohms single-ended
32° to 122°F (0° to 50°C)
10% to 90% RH (non-condensing)
Height: 0.98 in (2.49 cm)
Width:
5.00 in (12.70 cm)
Depth:
6.77 in (17.20 cm)
3.75 oz (0.105 kg)
DETAILS
±15dB
0.5dB
±15dB
0.5dB
Advertisement
Table of Contents
Need help?
Do you have a question about the C2VEQ-4 and is the answer not in the manual?
Questions and answers