Physical Description - Crestron C2N-RTHS Operations & Installation Manual

Crestron C2N-RTHS

Physical Description

Refer to the following illustrations.
The face of the sensor is 1.5 in (3.81 cm) in diameter, and has an LED and
pinhole access for the TSID button. The sensor body is 2.0 in (5.64 cm)
long, and mounts nearly flush to the wall.
The C2N-RTHS remote sensor is contained in a cylindrical plastic body.
It mounts in a one-inch diameter hole, exposing a 1.5 in (3.81 cm)
diameter disk that protrudes approximately 0.2 inch (0.5 cm) from the
surface of the wall. Total mounting depth is about 2.25 in (5.72 cm).
Front and Angled Views
Rear and Angled Views
NOTE: The face of the unit may be painted or papered over. Ensure that
paint does not enter (or wall paper cover) the perimeter gap or the holes
for the TSID button and LED.
Operations & Installation Guide - DOC. 6232A
Remote Temperature/Humidity Sensor
Remote Temperature/Humidity Sensor • 3