Specifications - Crestron C2N-RTHS Operations & Installation Manual

Remote Temperature/Humidity Sensor

Specifications

SPECIFICATION
Default ID
Control System Update
Files
2-Series Control System
CNMSX-AV/Pro Update File
CNRACKX/-DP Update File
CEN/CN-TVAV Update File
Firmware Version
Temperature Range
Humidity Range
Power
Dimensions
1 The latest versions can be obtained from the Crestron website. Refer to the NOTE
below.
2 Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest
Crestron Product Catalog for a complete list of 2-Series control systems.
3 Filenames for CNX and ST-CP update files have a UPZ extension. Files on the
website may be .zip or self-extracting .exe files containing the .cuz or .upz file. All
can be obtained from the Downloads section of the Crestron website. To avoid
program problems, make sure you are using the update file with the correct suffix
letter (e.g., S, V, W, X).
NOTE: Crestron software and any files on the website are for Authorized
Crestron dealers and Crestron Authorized Independent Programmers
(CAIP) only. New users may be required to register to obtain access to
certain areas of the site (including the FTP site).
2 • Remote Temperature/Humidity Sensors
1, 2, 3
Crestron C2N-RTHS
DETAILS
2B
Version 2.004.CUZ or later
Version 5.12.63X.UPZ or later
Version 5.12.63W.UPZ or later
Version 5.12.63V.UPZ or later
C2N-RTHS.V1.4.UPG
-40º to 176ºF (-40º to 80ºC)
0.1ºF (0.1ºC) Output Resolution
1.0ºF (0.5ºC) Accuracy
0 to 100% RH
1% RH Output Resolution
5% RH Accuracy
24 VDC @ 10 mA maximum
(<1 W) Provided by Cresnet
1 inch (2.54 cm) Tube Diameter
2.22 inch (5.64 cm) Tube Length
1.5 inch (3.81 cm) Front Disk
Operations & Installation Guide – DOC. 6232A