Serial Number To Tsid Conversion - Crestron C2N-RTHS Operations & Installation Manual

Remote Temperature/Humidity Sensor
CAUTION: This function does not prevent you from setting duplicate
IDs. Be sure to check current assignments before entering the desired
Cresnet ID number.

Serial Number to TSID Conversion

This utility is useful in a case where there are multiple devices of the same
type on a network, you need to locate a particular one, you know the TSID
but not the serial number, and your site installation list is based on device
serial numbers. In this (or the reverse) situation, do the following:
10 • Remote Temperature/Humidity Sensors
found. The list is similar to the report produced by pressing F4
(Report Network Devices); the first eight digits of each line
constitute the TSID number (hexadecimal form of the serial
number).
5. As you enter either the serial number or TSID number of the
device that requires a change, the corresponding TSID or serial
number automatically appears in its appropriate field, and the
list scrolls to and highlights the device listing. The listing
should show the device's current Cresnet ID.
6. Enter the Cresnet ID that the device should be set to and click
OK. The number you enter should appear on the list.
1. Open the Crestron Viewport.
2. From the Viewport menu, select Functions | Serial Number
TSID Conversion Tool. The "Serial Number
Conversion Tool" window is displayed.
"Serial Number to TSID Conversion Tool" Window
Crestron C2N-RTHS
Operations & Installation Guide – DOC. 6232A
TSID