Table of Contents
Advertisement
Remote Temperature/Humidity Sensors
Specifications
SPECIFICATION
Temperature Range (CHV-
RTS and CHV-RTHS)
Humidity Range (CHV-
RTHS only)
*Thermostat front panel indoor temperature display is limited to a range
of 0 – 110ºF (-18º to 43ºC). The front panel outdoor thermostat display
will display the full range of temperature.
Physical Description
Refer to the illustrations below and on the following page.
The face of the sensor is 1.5 in (3.81 cm) wide. The sensor body is 2.22 in
(5.64 cm) long, and mounts nearly flush to the wall.
The CHV-RTS and CHV-RTHS remote sensors are contained in a
cylindrical plastic body with a metal cap. They mount in a one-inch
diameter hole, exposing a 1.5 in (3.81 cm) diameter disk that protrudes
approximately 1/8 in (0.32 cm) from the surface of the wall. Total
mounting depth is about 2.25 in (5.72 cm).
Front and Angled Views
2 • Remote Temperature/Humidity Sensors
Crestron CHV-RTS/CHV-RTHS
DETAILS
-30º to 120ºF (-34.44Cº to
48.89ºC)*
0 to 100%
1.59 in
(4.04 cm)
Installation Guide – DOC. 8189A
Mounting Clips
Advertisement
Table of Contents
