Firmware Upgrade - Crestron C2N-RTHS Operations & Installation Manual

Remote Temperature/Humidity Sensor
NOTE: The parameters shown in the illustration above are the port
settings for a 2-Series control system.

Firmware Upgrade

A To take advantage of all the C2N-RTHS features, it is important that
firmware the unit contains the latest firmware available. Please check the
upgrade Crestron website for the latest version of firmware. Not every product
file has has a firmware upgrade, but as Crestron improves functions, adds new
the features, and extends the capabilities of its products, firmware
upgrades are posted.
extension
.upg.
18 • Remote Temperature/Humidity Sensors
"Port Settings" Window
4. To verify communication, select Diagnostics | Establish
Communications (Find Rack). This should display a window
that gives the COM port and baud rate. If communication
cannot be established, refer to the "Troubleshooting
Communications" section in the latest version of the 2-Series
Control System Reference Guide (Doc. 6256), which is
available from the Crestron website.
Crestron C2N-RTHS
Operations & Installation Guide – DOC. 6232A