Programming With Simpl Windows - Crestron C2N-RTHS Operations & Installation Manual

Remote Temperature/Humidity Sensor

Programming with SIMPL Windows

NOTE: The following are acceptable file extensions for programs that
include a C2N-RTHS, developed for specific control system types:
.smw
.spz
.bin
.csz
.ush
.usp
SIMPL Windows is Crestron's software for programming Crestron control
systems. It provides a well-designed graphical environment with a number
of workspaces (i.e., windows) in which a programmer can select,
configure, program, test, and monitor a Crestron control system. SIMPL
Windows offers drag and drop functionality in a familiar Windows
environment.
NOTE: The following descriptions assume that the reader has knowledge
of SIMPL Windows. If not, refer to the extensive help information
provided with the software.
NOTE: In the following description, the PRO2 control system is used.
This section describes a sample SIMPL Windows program that includes a
C2N-RTHS.
Configuration Manager is where programmers "build" a Crestron control
system by selecting hardware from the Device Library. In Configuration
Manager, drag the PRO2 from the Control Systems folder of the Device
Library and drop it in the upper pane of the System Views. The PRO2 with
its associated communication ports is displayed in the System Views upper
pane.
PRO2 System View
12 • Remote Temperature/Humidity Sensors
projectname.smw (source file)
projectname.spz (compiled file for 2-Series)
projectname.bin (compiled file for CNX generation)
projectname.csz (compiled file for CNX generation with
SIMPL+)
projectname.ush (compiled file for CNX generation with
SIMPL+header file)
projectname.usp (source code module for SIMPL+)
Crestron C2N-RTHS
Operations & Installation Guide – DOC. 6232A
®