Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Crestron C2N-IADS30X24
Summary of Contents for Crestron C2N-IADS30X24
- Page 1 Crestron C2N-IADS30X24 Intercom Audio Distribution System Operations Guide...
- Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2006 Crestron Electronics, Inc.
-
Page 3: Table Of Contents
Crestron C2N-IADS30X24 Contents Intercom Audio Distribution System: C2N-IADS30X24 Introduction ... 1 Features and Functions ... 1 Applications... 2 Specifications ... 4 Physical Description... 5 Industry Compliance ... 8 Setup ... 9 Network Wiring... 9 CAT5 Wiring... 9 Identity Code ... 9 Hardware Hookup ... -
Page 5: Intercom Audio Distribution System: C2N-Iads30X24
The C2N-IADS30X24 Intercom Audio Distribution Switcher (IADS) facilitates the distribution and control of audio intercom signals for up to 22 touchpanels and door stations using inexpensive CAT5E cable. The IADS integrates neatly with Crestron's CNX-PAD8A and CNX-BIPAD8 audio distribution processors, enabling voice... -
Page 6: Applications
Additional configurations can be achieved by interfacing CAT5 audio ports on the IADS directly to CAT5 audio ports on the CNX-BIPAD8 and many other Crestron products. A 5-pin connector, paralleled with the last CAT5 I/O port, permits interfacing to... - Page 7 Your actual configuration is limited only by the number of ports available, and could also contain multiple IADS and IVDS devices. Operations Guide – DOC. 6170A Intercom Audio Distribution System Intercom Audio Distribution System: C2N-IADS30X24 • 3...
-
Page 8: Specifications
C2N-IADS30X24 Functional Diagram Specifications Specifications for the IADS are listed in the following table. C2N-IADS30X24 Specifications (Continued on following page) 4 • Intercom Audio Distribution System: C2N-IADS30X24 SPECIFICATION Balanced line performance Audio input (RJ-45 connectors) Differential line input impedance: 2k-Ohm... -
Page 9: Physical Description
Crestron C2N-IADS30X24 C2N-IADS30X24 Specifications (Continued) 1. The latest software versions can be obtained from the Crestron website. Refer to the NOTE following 2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product Catalog 3. CNX update files are required for either CNMSX-AV/Pro or CNXRACKX/-DP. Filenames for CNX NOTE: Crestron software and any files on the website are for Authorized Crestron dealers and Crestron Authorized Independent Programmers (CAIP) only. - Page 10 Intercom Audio Distribution System C2N-IADS30X24 Physical View (Rear) C2N-IADS30X24 Overall Dimensions Connectors, Controls, & Indicators (Continued on following page) 6 • Intercom Audio Distribution System: C2N-IADS30X24 CONNECTORS CONTROLS, & INDICATORS This LED illuminates when 24 volts DC is PWR LED supplied to the IADS.
-
Page 11: Controls And Indicators
For additional information on audio/video connections over CAT5, refer to the latest version of the Crestron CAT5 Wiring Reference Guide (Doc. 6137) which is available from the Crestron website (www.crestron.com/manuals). If the TELEPHONE connector is used, the REMOTE AUDIO IN/OUT port 22 must not be used. -
Page 12: Industry Compliance
8 • Intercom Audio Distribution System: C2N-IADS30X24 Crestron C2N-IADS30X24 Reorient or relocate the receiving antenna. -
Page 13: Setup
Crestron recommends using CresCAT-IM (or D) wire or other high-quality CAT5 cable for transmitting CAT5 audio signals. When using a Crestron wiring solution, the CresCAT-IM (or D) wire can carry audio and video signals up to 500 feet (observe distance limitations based upon power consumption for the touchpanel (or other device) in use). - Page 14 These feet should be attached prior to the hookup procedure. Refer to the following illustration for placement of the feet. 10 • Intercom Audio Distribution System: C2N-IADS30X24 • When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack.
- Page 15 Refer to “Network Wiring” on page 9 before attaching the 4-position terminal block connector. Apply power after all connections have been made. When making connections to the IADS, use Crestron power supplies for Crestron equipment. Hardware Connections for the C2NIADS30X24 Operations Guide –...
-
Page 16: Programming Software
Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at http://support.crestron.com. - Page 17 If necessary, double click a device to open the “Device Settings” window and change the Net ID, as shown in the following figure. • The ID code specified in the SIMPL Windows program must match the Net ID of each unit. Intercom Audio Distribution System: C2N-IADS30X24 • 13...
-
Page 18: Example Program
Detail View. A description for each signal in the symbol is described in the SIMPL Windows help file (F1). Example Program An example program for the IADS is available from the Crestron website (http://www.crestron.com/exampleprograms). 14 • Intercom Audio Distribution System: C2N-IADS30X24 Crestron C2N-IADS30X24 Operations Guide - DOC. -
Page 19: Uploading And Upgrading
However, before attempting to upload or upgrade, it is necessary to establish communication. Establishing Communication Use Crestron Toolbox for communicating with the IADS; refer to the Crestron Toolbox help file for details. There is a single method of communication: indirect serial communication. -
Page 20: Problem Solving
Calculate Power CAUTION: Use only Crestron power supplies for Crestron equipment. Failure to do so could cause equipment damage or void the Crestron warranty. CAUTION: Provide sufficient power to the system. Insufficient power can lead to unpredictable results or damage to the equipment. -
Page 21: Reference Documents
For assistance in your local time zone, refer to the Crestron website (http://www.crestron.com/) for a listing of Crestron worldwide offices. You can also log onto the online help section of the Crestron website to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features. -
Page 22: Return And Warranty Policies
Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. - Page 23 Crestron C2N-IADS30X24 Intercom Audio Distribution System This page is intentionally left blank. Intercom Audio Distribution System: C2N-IADS30X24 • 19 Operations Guide – DOC. 6170A...
- Page 24 Crestron Electronics, Inc. Operations Guide – DOC. 6170A 15 Volvo Drive Rockleigh, NJ 07647 (2008775) Tel: 888.CRESTRON 09.06 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.
Need help?
Do you have a question about the C2N-IADS30X24 and is the answer not in the manual?
Questions and answers