Crestron AES Operation Manual page 16

Entertainment System
12 • Entertainment System: Adagio AES
Connectors, Controls, & Indicators (Continued)
# CONNECTORS,
CONTROLS, &
INDICATORS
25 SOURCES
26 ROOMS
27 IR OUT
28 IR IN
29 INPUT
(Continued on following page)
Crestron Adagio™ AES
DESCRIPTION
(10) Sets of unbalanced, line-level audio
inputs with loop through output. Inputs 1
through 6 are driven by tuner cards
installed in slots 1 through 3 (#24) and
cannot be used by external sources when
tuner cards are installed. Refer to "Adagio
Tuner Cards" on page 19 for information
on which input ports are reserved for
which card slot.
(6) Sets of speaker-level, mono/stereo
outputs provide 45 watts per channel into
8-ohm impedance speakers (60 watts into
4-ohm impedance speakers). Two-pin
terminal block interface connectors which
accept up to 12 AWG (4.0 mm
wire are included for each speaker
terminal.
(8) 3.5mm tip-ring-sleeve (TRS) mini-
phone ports enable serial communication
in a variety of formats including infrared
and one-way RS-232; Use Crestron
Infrared Emitter Probe (part number
STIRP, sold separately) for controlling
infrared devices. For information on other
serial control cables, contact Crestron.
Tip
Ring
Sleeve
Tip: IR Data Out
Ring: No Connection
Sleeve: Ground
(1) 3.5 mm TRS mini-phone port allows IR
wireless control from third-party universal
remotes (via Crestron IR Receiver
CNXRMIRD) using RC-5 IR commands.
Tip
Ring
Sleeve
Tip: IR Data In
Ring: +5 VDC
Sleeve: Ground
(4) Digital inputs. Connect to 24 VDC
(max) logic output or contact closure from
external devices. A five-pin terminal block
interface connector is included.
Operations Guide – DOC. 6456A
2
) speaker