Table of Contents
Advertisement
Entertainment System
Select Tuner Format
Configure the Network
24 • Entertainment System: Adagio AES
⇒ Configure Keypads – Configures the source assignments of the top
six buttons of every C2N-DBF12 keypad that is connected to the
system.
⇒ About – Provides information about the AES such as IP data,
firmware version, and program information.
To configure the selected option, press the ENTER button.
To exit Installer Tools and save changes to the AES' configuration, press
the MENU button.
Select the tuning format to specify the tuning method used by an installed AM/FM
tuner. When using the North American tuner format, the tuner will tune FM
frequencies in 100 kHz steps and AM frequencies in 10 kHz steps. When using the
European tuner format, the tuner will tune FM frequencies in 50 kHz steps and AM
frequencies in 9kHz steps.
•
Open Installer Tools as described on page 23, select Select Tuner Format,
and press the ENTER button
Select Tuner Format Menu
Select Tuner Format
SOURCE
North American
ROOM
European
HOUSE
MENU
•
Use the selection knob to select a tuner format. To cancel and return to the
Installer Tools menu, press the MENU button.
•
To confirm, press the ENTER button and return to the Installer Tools
menu.
The AES must be configured to recognize devices that communicate over Ethernet
(i.e. AAS, CEN-IDOC).
•
Open Installer Tools as described on page 23, select Configure Network,
and press the ENTER button.
Configure Network
Configure Network
SOURCE
ROOM
HOUSE
Yes
MENU
•
To install a CEN-IDOC, press the soft button labeled Yes and follow the
instructions onscreen. Otherwise, press the soft button labeled No. The
Crestron Adagio™ AES
Do you want to install
a CEN-IDOC in your
system?
No
Operations Guide – DOC. 6456A
BKLT
SCHED
DISPLAY
MORE
BKLT
SCHED
DISPLAY
MORE
Advertisement
Table of Contents
