Crestron BB-1000L Wall Mount Back Box: BB-1000L Description The BB-1000L is a pre-construction mounting option for the Series 1000 Wall Mounted Touchpanels and the APAD Wall Mount Controller. The table below lists all parts included with the BB-1000L. Supplied Components The mounted view of the BB-1000L is shown below.
Assembly View FRONT MOUNTING PLATE (2004806), QTY. 1 ATTACH AFTER ATTACHING MOUNTING BRACKETS 2 • Wall Mount Back Box: BB-1000L • #2 Phillips tip screwdriver 1. Remove knockouts as required. 2. Attach supplied #8 self-tapping screw to wall mount enclosure for grounding.
1. Position assembly to the front edge of the stud and align it as even and as flush as possible. 2. Use the level and verify that the back box is horizontal. Leveling must be done before proceeding. 3. Attach the assembly to the left or right side of the stud with standard drywall screws or nails (supplied by other).
Wall Mount Back Box Mounted BB-1000L with Optional Cover Plate Installed Other Mounting Option Accessories If too much of the cover plate is exposed after the drywall is cut, you may need to patch the area. Crestron provides the following accessories: The manuals for the MMK-1000L and TMK-1000L are available for review from the Crestron website (http://www.crestron.com/manuals).
For assistance in your local time zone, refer to the Crestron website (http://www.crestron.com/) for a listing of Crestron worldwide offices. You can also log onto the online help section of the Crestron website to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features.
Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures.
Page 11
Crestron BB-1000L Wall Mount Back Box This page is intentionally left blank. Wall Mount Back Box: BB-1000L • 7 Installation Guide - DOC. 6060A...
Page 12
Crestron Electronics, Inc. Installation Guide – DOC. 6060A 15 Volvo Drive Rockleigh, NJ 07647 2002104 Tel: 888.CRESTRON 07.06 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.