Back Box: BB-1000 Description The back Box, BB-1000, is the optional mounting hardware that is part of the Crestron Home total control system. The BB-1000 secures a Crestron Series 1000 Touchpanel to a wall. The mounting hardware consists of : Three views and dimensions for the metal pieces of the BB-1000 are shown below.
Complete the following installation procedure in the order provided. The only tools required are a drywall saw ( or equivalent) and socket screwdriver. Back Box: BB-1000 Locate an area on the wall that is ¼” (0.635 cm) from either side of a stud.
Page 7
Aligning Mounting Bracket Alignment Mark with Corner of Stud Bracket CORNER OF STUD MOUNTING BRACKET MOUNTING BRACKET ALIGNMENT MARK Using four screws, not supplied, secure stud mounting bracket to stud, as shown below. Secure Stud Mounting Bracket Back Box Back Box: BB-1000...
Back Box Further Inquiries If after reviewing this Installation Guide for the BB-1000, you cannot locate specific information or have questions, please take advantage of Crestron's award winning technical support team by calling: For local support from exclusive Crestron factory-trained personnel call:...
(3) years from the date of shipment to purchaser. Disk drives and any other moving or rotating mechanical parts are covered for a period of one (1) year. CRESTRON warrants all its other products for a period of one year from the defects mentioned above, excluding touchscreen display components which are covered for 90 days.