Screw, #04-40 x 2”, Pan, Phil 2018793 Screw, #08-8B x 1/4”, Pan, Phil 2007277 The mounted view of the BB-1000L is shown in the following illustration. BB-1000L Mounted View (Optional Cover Plate Attached) Wall Mount Back Box: BB-1000L • 1 Installation Guide - DOC. 6060B...
Page 4
Wall Mount Back Box Crestron BB-1000L The dimensions of the BB-1000L are shown below and on the next page. Dimensional Drawing (Fully Assembled without Cover Plate) 3.74 in (9.49 cm) 6.20 in (15.75 cm) 3.95 in 6.35 in (10.02 cm) (16.13 cm)
Page 5
Crestron BB-1000L Wall Mount Back Box Dimensional Drawing - Cover Plate 4.74 in (12.03 cm) 4.65 in (11.82 cm) 0.03 in (0.08 cm) Wall Mount Back Box: BB-1000L • 3 Installation Guide - DOC. 6060B...
4. Feed cables through knockout holes. NOTE: This assembly should use Class 2 wiring only. 4 • Wall Mount Back Box: BB-1000L Installation Guide - DOC. 6060B...
Page 7
MOUNTING SCREWS. COVER PLATE (2004826) TO COVER CUTOUT IN DRYWALL BEFORE CONTROLLER IS INSTALLED SCREWS (4) #04-40 x 2" (MAY BE REQUIRED BY LOCAL PAN HEAD (2018793) BUILDING CODES) Wall Mount Back Box: BB-1000L • 5 Installation Guide - DOC. 6060B...
#04-40 x 2” screws. If the controller is to be installed, refer to the latest revision of the APAD Installation and Operations Guide (Doc. 6455) for installation instructions. The document is available from the Crestron website (http://www.crestron.com/manuals). Refer also to the following comprehensive illustration.
TMK-1000L (Doc. 6063) - for smaller repairs and to provide a smooth edge at the opening. This option provides a finished appearance and is preferred when wallpaper is hung. The manuals for the MMK-1000L and TMK-1000L are available from the Crestron website. Wall Mount Back Box: BB-1000L • 7...
This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc. (E227280) As of the date of manufacture, the BB-1000L has been tested and found to comply with specifications for CE marking marking and standards per EMC and Radiocommunications Compliance Labelling.
Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended or if it has been subjected to misuse, accidental damage, modification or improper installation procedures.
Page 12
Crestron Electronics, Inc. Installation Guide – DOC. 6060B 15 Volvo Drive Rockleigh, NJ 07647 (2002104) Tel: 888.CRESTRON 01.08 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.