Crestron TSW-UMB-70-BBI Quick Start

TSW-UMB-70-BBI
Wall Mount Back Box for TSW-70 Series
The Crestron® TSW-UMB-70-BBI
box designed for use with the TSW-UMB-70 universal mounting bracket.
The TSW-UMB-70-BBI permits a TSW-70 series touch screen to be
installed in a concrete or masonry wall. Conduit knockouts are provided
on the top, bottom, and sides of the back box.

In the Box

1 TSW-UMB-70-BBI, Wall Mount Back Box
Additional Items
2 Screw, 6-32 x 1/2 in., Phillips (2007240)

Install the TSW-UMB-70-BBI

To install the TSW-UMB-70-BBI:
NOTES:
For some installations, forced venting may be required.
l
Knockout holes are intended for Class 2 wiring only and are 20 mm
l
(13/16 in.) in diameter.
is a recessed wall-mounted metal back
1. Separate the two halves of the TSW-UMB-70 assembly by removing
the two 1 in. screws that hold the halves together.
NOTE: The TSW-UMB-70 is included with the TSW-570 and
TSW-570P touch screens. For TSW-770 and TSW-1070
installations, the TSW-UMB-70 must be purchased separately.
TSW-UMB-70 Before Separation
TSW-UMB-70 After Separation
Only the front portion of the TSW-UMB-70 is required for installation
with the TSW-UMB-70-BBI. The rear portion may be discarded or
retained for future use.
Quick Start
1