Advertisement
Quick Links
TSW-770/1070-MUMK
Mullion Mount Kit for TSW-770 and TSW-1070
The Crestron®
TSW-770/1070-MUMK
to attach a TSW-770 or TSW-1070 touch screen to the mullion of an
interior glass wall, window, or partition. The MUMK mounts the touch
screen to the left or right of any hollow, metallic vertical mullion, and
two mounting brackets are provided that allow the MUMK to be
installed in one of two configurations (side mount or front mount).
Wiring is run to the touch screen from inside the mullion.
In the Box
1
TSW-770/1070-MUMK, Mullion Mount Kit
Additional Items
1
Bracket, Mullion, Front Mount (2053274)
1
Bracket, Mullion, Side Mount (2053273)
2
Jacknut, 6-32 (2053371)
2
Screw, 4-40 x 1/4 in., Undercut Head, Phillips (2007152)
4
Screw, 4-40 x 1/2 in., Undercut Head, Phillips (2007174)
4
Screw, 4-40 x 3/4 in., Flat Head, Phillips (2029110)
2
Screw, 6-32 x 3/8 in., Socket Head (2007230)
2
Screw, 6-32 x 7/17 in., Pan Head, Phillips (2007236)
2
Screw, 6-32 x 1/2 in., Flat Head. Phillips (2007241)
2
Screw, 6-32 x 1/2 in., Pan Head, Phillips (2007240)
1
Screw, 6-32 x 1 in., Truss Head, Combo (2054883)
2
Spacer, 06 (2007095)
1
Template, Mullion Cutout (4529900)
1
Tool, 7/64 in. Allen Wrench (2021068)
1
Tool, 4 in. Jacknut Wrench (2053373)
is a mullion mount kit that is used
TSW-770/1070-MUMK-B Only
1
Corner Cap, Mullion, Front Mount, Black (4530126)
1
Mount, Mullion, with Magnets, Black (4529894)
1
Panel Cover, Mullion, Black (2055338)
TSW-770/1070-MUMK-W Only
1
Corner Cap, Mullion, Front Mount, White (4530125)
1
Mount, Mullion, with Magnets, White (4529941)
1
Panel Cover, Mullion, White (2055337)
Quick Start
1
Advertisement
Related Manuals for Crestron TSW-770-MUMK
Summary of Contents for Crestron TSW-770-MUMK
- Page 1 Quick Start TSW-770/1070-MUMK Mullion Mount Kit for TSW-770 and TSW-1070 The Crestron® TSW-770/1070-MUMK is a mullion mount kit that is used TSW-770/1070-MUMK-B Only to attach a TSW-770 or TSW-1070 touch screen to the mullion of an Corner Cap, Mullion, Front Mount, Black (4530126) interior glass wall, window, or partition.
- Page 2 6-32 x 1/2 in. flat head screws. The mullion must have a minimum mounting depth of 3/4 in. (19 mm). If the mullion has a shallower depth, contact Crestron for custom installation instructions. The chosen mounting location must provide sufficient length to run the cables from their sources through the mullion and up to the touch screen.
- Page 3 Quick Start TSW-770/1070-MUMK Mullion Mount Kit for TSW-770 and TSW-1070 7. Install the mullion mount: 8. Align the TSW-770/TSW-1070 mounting bracket (included with touch screen) with the panel cover as shown in the illustration below, a. Pull the two cover plates gently off of the top and bottom of the and then secure both to the mullion mount with the four 4-40 x 1/2 in.
- Page 4 Quick Start TSW-770/1070-MUMK Mullion Mount Kit for TSW-770 and TSW-1070 If the TSW-770-LB or TSW-1070-LB light bar will be used in this 9. Reattach the two fitted cover plates on the top and bottom of the installation, use the four provided 4-40 x 3/4 in. screws instead of the mullion mount so that the cover plates magnetically snap into place 4-40 x 1/2 in.
- Page 5 NOTES: The mullion must have a minimum mounting depth of 3/4 in. (19 mm). If the mullion has a shallower depth, contact Crestron for custom installation instructions. The chosen mounting location must provide sufficient length to run the cables from their sources through the mullion and up to the touch screen.
- Page 6 Quick Start TSW-770/1070-MUMK Mullion Mount Kit for TSW-770 and TSW-1070 7. Install the mullion mount: 8. Align the TSW-770/TSW-1070 mounting bracket (included with touch screen) with the panel cover as shown in the illustration below, a. Pull the two cover plates gently off of the top and bottom of the and then secure both to the mullion mount with the four 4-40 x 1/2 in.
- Page 7 Quick Start TSW-770/1070-MUMK Mullion Mount Kit for TSW-770 and TSW-1070 If the TSW-770-LB or TSW-1070-LB light bar will be used in this 10. Reattach the two fitted cover plates on the top and bottom of the installation, use the four provided 4-40 x 3/4 in. screws instead of the mullion mount so that the cover plates magnetically snap into place 4-40 x 1/2 in.
- Page 8 Crestron disclaims any Visit the Product Page proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. ©2021 Crestron Electronics, Inc.
Need help?
Do you have a question about the TSW-770-MUMK and is the answer not in the manual?
Questions and answers