Sanus Systems WMS2 Assembly Instructions Manual page 6

Step 5: Add Foot and Extension
Slide the Foot (d) over the Arm (f) until it fits into one of the three slots in the Arm. Slide the Extension (e) into the Arm. Adjust the Foot
and Extension until the speaker is a snug fit. Once you have them in the desired positions, thread a Long Set Screw (l) into the Foot and
tighten firmly with the Allen Key (o). Thread a Short Set Screw (m) into the Arm and tighten it with the Allen Key until the Extension is
secure. See Diagram 5 for assistance.
Note: Do not leave speaker on
mount unattended unless all
set screws are in place!
e
Step 6: Add Cap
Press fit the Cap (n) into the Extension (e). See Diagram 6 for assistance.
e
n
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
d
l
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA
Diagram 5
slot
f
m
Diagram 6