Sanus Systems WMS3 Manual

Thank you for choosing the Sanus Systems WMS3 wall mount. The Sanus Systems WMS3
wall mount is designed to support speakers weighing up to 3.62 kg (8 lbs.).
This product is designed for use in wood stud and concrete block walls only! The
wall must be capable of supporting up to five times the weight of the monitor and
mount combined. If you have any doubts about the ability of the wall to support the
monitor, contact Sanus Systems Customer Service, or a qualified contractor.
This product contains small items that could be a choking hazard if swallowed.
Keep these items away from young children!
Do not use this product for any purpose not explicitly specified by Sanus Systems.
Improper installation or use may cause personal injury and/or property damage. If
you do not understand these instructions, or if you have doubts about the safety of
the installation, contact Sanus Systems Customer Service. Sanus Systems is not liable
for injury or damage caused by incorrect installation or use.
Hardware and procedures for multiple mounting configurations are included.
When you see this symbol, choose the correct configuration to suit your
OPT
needs. Not all hardware included will be used.
Sanus Systems 2221 Hwy 36 West, St Paul, MN 55113 USA
USA Customer Service 1-800-359-5520 • www.sanus.com
WMS3
6901-100150 <01>
CAUTION
WARNING
CAUTION