Subscribe to Our Youtube Channel
Related Manuals for Crestron 1700C-BTNB-BEZELS
Summary of Contents for Crestron 1700C-BTNB-BEZELS
- Page 1 Crestron 1700C-BTNS-BEZELS and 1700C-BTNB-BEZELS Button Bezel Kits Operations & Installation Guide...
- Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2005 Crestron Electronics, Inc.
-
Page 3: Table Of Contents
Button Bezel Kits: 1700C-BTNS/BTNB-BEZELS Introduction...1 Installation...3 Problem Solving...6 Troubleshooting...6 Further Inquiries ...6 Future Updates...6 Return and Warranty Policies ...7 Merchandise Returns / Repair Service CRESTRON Limited Warranty Operations & Installation Guide - DOC. 6321A Button Bezel Kits ...7 ...7 Contents • i... -
Page 5: Button Bezel Kits: 1700C-Btns/Btnb-Bezels
LCD screen—and two 5-button membrane switch actuators. The 1700C-BTNB-BEZELS kit is supplied with current 1700 Series touchpanels, but is also available for purchase for earlier 1700 Series units. The other kits are available for purchase for current or earlier 1700 Series touchpanels. - Page 6 HARDKEY DISABLED command in startup preferences ensures that the panel display remains inactive. Pushbutton Layout and Join Number Assignment* Use the Crestron Engraver (version 2.3 or later) to submit custom engraving requests. The Engraver requires Crestron database (version 16.4.3 or later). 2 • Button Bezel Kits: 1700C-BTNS/BTNB-BEZELS Crestron 1700C-BTNS/BTNB-BEZELS ...
-
Page 7: Installation
Crestron 1700C-BTNS/BTNB-BEZELS Installation Perform the following to remove the existing bezel and install the pushbuttons, new bezel, and supporting parts onto the 1700 Series touchpanel. A #1 Phillips screwdriver is required. Refer to the illustrations that accompany the procedure. 1. Remove power from the touchpanel (either disconnect the... - Page 8 8. Reinstall the four screws to secure the bezel to the base. Tighten the screws, being careful not to strip the threads. 9. Re-connect power and verify that the pushbuttons function properly. 4 • Button Bezel Kits: 1700C-BTNS/BTNB-BEZELS Crestron 1700C-BTNS/BTNB-BEZELS Operations & Installation Guide - DOC. 6321A...
- Page 9 Crestron 1700C-BTNS/BTNB-BEZELS Exploded View of Button Bezel Kit Bezel Pushbuttons (1 - 5) & Membrane Switch Actuator PCB Surface Pushbuttons (6 - 10) & Membrane Switch Actuator Detail of Edge Alignment Operations & Installation Guide - DOC. 6321A Button Bezel Kits...
-
Page 10: Problem Solving
Crestron website (www.crestron.com) for a listing of Crestron worldwide offices. You can also log onto the online help section of the Crestron website to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features. -
Page 11: Return And Warranty Policies
Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. - Page 12 Crestron Electronics, Inc. Operations & Installation Guide - DOC. 6321A 15 Volvo Drive Rockleigh, NJ 07647 02.05 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.
Need help?
Do you have a question about the 1700C-BTNB-BEZELS and is the answer not in the manual?
Questions and answers