Crestron 1700C-BEZEL Bezel Kit: 1700C-BEZEL Introduction The Bezel Kit (1700C-BEZEL) includes the material to eliminate “quick” pushbuttons from a Crestron replacement bezel without button openings is included in the kit. NOTE: Recall that each pushbutton had a command with fixed digital join number in the SIMPL Windows program.
3. When in the normal position, lift the bezel from the touchpanel. 4. As shown in the illustration on the next page, remove the pushbuttons and the membrane switch actuators from the PCB surface. 2 • Bezel Kit: 1700C-BEZEL Crestron 1700C-BEZEL Screw Battery...
Page 7
5. As shown in the illustration on the next page, position the new bezel (without pushbutton cutouts) over the exposed touchpanel. Operations & Installation Guide - DOC. 6252 Bezel Kit Pushbuttons & Membrane Switch Actuator Bezel Kit: 1700C-BEZEL • 3...
The solution is to modify the VisionTools Pro-e project and make the commands (with fixed digital join numbers) available from one or more of the project pages. 4 • Bezel Kit: 1700C-BEZEL Crestron 1700C-BEZEL Operations & Installation Guide - DOC. 6252...
• In Australia and New Zealand, call Crestron Pacific at +613-9480-2999. You can also log onto the online help section of the Crestron website (www.crestron.com) to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features.
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures.
Need help?
Do you have a question about the 1700C-BEZEL and is the answer not in the manual?
Questions and answers