Crestron IRP2 Installation Manual
Crestron IRP2 Installation Manual

Crestron IRP2 Installation Manual

Infrared emitter
Hide thumbs Also See for IRP2:

Advertisement

Crestron and the Crestron logo are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other
countries. Other trademarks, registered trademarks and trade names may be used in this document to refer to either the entities
claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others.
Crestron Electronics, Inc.
15 Volvo Drive, Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
Regulatory Compliance
As of the date of manufacture, the IRP2 has been tested and found to comply with
specifications for CE marking and standards per EMC and radiocommunications
Compliance Labelling.
Further Inquiries
If you cannot locate specific information or have questions after reviewing this guide, please
take advantage of Crestron's award winning customer service team by calling Crestron at
1-888-CRESTRON [1-888-273-7876]. For assistance in your region, please refer to the
Crestron Web site (www.crestron.com) for a listing of Crestron worldwide offices.
You can also log onto the online help section of the Crestron Web site
(www.crestron.com/onlinehelp) to ask questions about Crestron products. First-time users
will need to establish a user account to fully benefit from all available features.
Future Updates
As Crestron improves functions, adds new features and extends the capabilities of the IRP2,
additional information may be made available as manual updates. These updates are solely
electronic and serve as intermediary supplements prior to the release of a complete
technical documentation revision.
Check the Crestron Web site periodically for manual update availability and its relevance.
Updates are identified as an "Addendum" in the Download column.
©2011 Crestron Electronics, Inc.
Installation Guide - DOC. 8168C
(2002188)
Specifications subject to
change without notice.
08.11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IRP2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Crestron IRP2

  • Page 1: Regulatory Compliance

    Crestron and the Crestron logo are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries. Other trademarks, registered trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
  • Page 2 Below) 1. Identify the clear adhesive layer on the flat bottom surface of the IRP2 shell. 2. Peel off the protective cover and affix the IRP2 to the center of the IR sensor window on the controlled component’s front panel.

Table of Contents