Operation - Becker AR6201 Operating Instructions Manual

Becker Avionics
This chapter contains information and instructions for safe operation of the devices.
The devices of the 6200 VHF transceiver series are for voice communication in the
very high frequency band between 118.000 to 136.975 MHz (radio communication
part of air-band) with a selectable channel spacing of 25 or 8.33 kHz.
• All control and display elements are on the front side.
For further description we use also short forms.
6200 series
•
• AR62X1
AR62X3
•
RT62X1
•
• RCU62X1
If a description refers to only one of the product variants is it specified.
•
* For details please refer to related manual:
http://www.becker-avionics.com/manuals/
Obey the national requirements for operation of radio equipment.
0638.420-071 Issue 06 02/2021
in general for the device family.
for: AR6201, AR6211, (Single Block Transceiver).
for: AR6203, AR6213 (Single Block Transceiver).
for: RT6201, RT6211 (Remote-Controlled Transceiver).
for: RCU6201, RCU6211 (Remote Control Unit).
• The figures for display content mainly show the transceiver in
8.33/25 kHz mixed mode (pictures for 25 kHz differ only in
number of digits for frequency).
• The user can do the HMI operation on the primary controller or
on optional secondary controller RCU62X1.
• The word "frequency" is also used in the sense of "channel
name", as defined in EUROCAE, document ED 23C
chapter 1.3.2, Volume II.
• In this document the word "memory channel" or "channel" is
also used in the sense of a memory position identified by a
channel number, where a frequency may be stored for later
use.
• Some functions and adjustments are only available through
the password-protected configuration setup*.
Communication → VHF Transceiver
VHF Transceiver
Operating Instructions

Operation

13