Lutron Electronics LHD0-96W24V-U Manual

LED Dimming Controller
HomeWorks Digital 0.1% 3-wire Constant
Voltage 24 V- LED Controller with Soft-on,
Fade-to-Black
The HomeWorks digital 0.1% constant voltage controller
is a high‑performance LED controller capable of
controlling up to 96 W of 24 V- constant voltage
loads. This controller provides smooth and continuous
dimming down to 0.1% low‑end. It is ideal for use with
strip lighting in applications such as coves, under or
over cabinet lighting and pathway lighting.
The controller is UL
®
compartment and can be mounted up to 150 ft (45 m)
away from the load.
Features
• Continuous, flicker‑free dimming from 100% to 0.1%
• Soft‑on, Fade‑to‑Black operation for HomeWorks
digital: fades smoothly between 0% and 0.1% when
turned on and off for an incandescent like experience.
• UL Listed for United States and Canada (cULus
®
• Field Adjustment Knob offers customer low‑end light
output tuning for better fixture‑to‑fixture matching.
• Guaranteed dimming performance when used with
Lutron controls:
– HomeWorks digital module
– Lutron 3‑wire controls and interfaces.
• Protected from miswires of input power, up to 277 V~,
to HomeWorks digital control inputs...
• Rated lifetime of 50,000 hours at 40 °C (104 °F)
ambient temperature and maximum loading.
• FCC Part 15
– Class A (277 V~)
– Class B (120 V~)
• Inrush limiting allows full loading of circuit breakers
without nuisance tripping.
• 100% end‑of‑line performance tested at a
Lutron factory.
Light output at 0.1% depends on installation and light engine efficacy.
1
Soft‑on, Fade‑to‑Black dimming technology is not available for 3‑wire controls.
2
S P E C I F I C AT I O N S U B M I T TA L
®
Job Name:
Job Number:
HomeWorks Digital 0.1% Constant Voltage Controller
Listed with an integrated wiring
Model Numbers:
.
1
2
HomeWorks Digital 0.1% Constant Voltage Controller
).
5.5 in (140 mm) W x 2.0 in (51 mm) H x 10.5 in (267 mm) L
®
• RoHS compliant.
• Restores all settings after power failure.
• Barrier provided for Class 2 separation in the wiring
compartment.
• Redundant connections on line and control terminals
for easy daisy chain wiring.
• Redundant connections on output terminals allow for
easy wiring of two LED load home runs.
• Class 2 output designed to withstand hot swap.
• For more information please visit: www.lutron.com
Architectural Dimming
3691213a 1 06.01.21
Page
1