Advertisement
LED Dimming Controller
Facilities Manager
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation. Modifications not expressly
approved by Lutron Electronics Co., Inc. could void
the users authority to operate this equipment.
277 V~ NOTE: This equipment has been tested at
277 V~ and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference in which case the
user will be required to correct the interference at their
own expense.
120 V~ NOTE: This equipment has been tested at
120 V~ and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment
and receiver.
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio / TV
technician for help.
S P E C I F I C AT I O N S U B M I T TA L
®
Job Name:
Job Number:
HomeWorks Digital 0.1% Constant Voltage Controller
Model Numbers:
Service
Controller Warranty
For warranty information, please visit
www.lutron.com/driverwarranty
Replacement Parts
When ordering Lutron replacement parts, please
provide the full model number. Consult Lutron if you
have any questions.
Further Information
For further information, please visit us at
www.lutron.com or contact our LED Control Center
of Excellence at 1.844.LUTRON1 (U.S.A. and
Canada only) or LEDs@lutron.com
The Lutron logo, Lutron, HomeWorks, Pico, Nova T*, Nova, Skylark, Diva,
Ariadni, Maestro, Maestro Wireless, RadioRA, Soft‑on, Fade‑to‑Black, and
QwigFig are trademarks or registered trademarks of Lutron Electronics Co.,
Inc. in the US and/or other countries.
All other product names, logos, and brands are property of their
respective owners.
Architectural Dimming
3691213a 13 06.01.21
Page
13
Advertisement
