AXIOMTEK MMB501 User Manual
  1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Motherboard
  5. MMB501
  6. User manual

AXIOMTEK MMB501 User Manual

Intel socket 1151 core i7/ i5/ i3 processors micro micro atx industrial motherboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MMB501
®
TM
Intel
Socket 1151 Core
i7/ i5/ i3
Processors Micro MICRO ATX
Industrial Motherboard
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MMB501 and is the answer not in the manual?

Questions and answers

Related Manuals for AXIOMTEK MMB501

Summary of Contents for AXIOMTEK MMB501

  • Page 1 MMB501 ® Intel Socket 1151 Core i7/ i5/ i3 Processors Micro MICRO ATX Industrial Motherboard User’s Manual...
  • Page 2 Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Axiomtek Co., Ltd.

  • Page 3: Esd Precautions

    It discharges static electricity from your body.  Wear a wrist-grounding strap, available from most electronic component stores, when handling boards and components. Trademarks Acknowledgments Axiomtek is a trademark of Axiomtek Co., Ltd. ® ® Intel and Celeron are trademarks of Intel Corporation.

  • Page 4: Table Of Contents

    Table of Contents Disclaimers ...................... ii ESD Precautions ..................... iii Chapter 1 Introduction ..........1 Features ....................2 Specifications ..................2 Chapter 2 Board and Pin Assignments ....5 Board Layout ..................5 Rear I/O ....................7 Jumper Settings ..................8 2.3.1 Clear CMOS (JP1) ..................
  • Page 5 System Memory .................. 23 Chapter 4 AMI BIOS Setup Utility ......25 Starting ....................25 Navigation Keys .................. 25 Main Menu ..................27 Advanced Menu .................. 28 Chipset Menu ..................44 Security Menu ..................53 Boot Menu ................... 54 Save & Exit Menu ................55 Appendix A Watchdog Timer ........
  • Page 6 This page is intentionally left blank.

  • Page 7: Chapter 1 Introduction

    MMB501 LGA1151 ATX Motherboard Chapter 1 Introduction The MMB501 is an advanced micro ATX industrial motherboard based on the 7 ® ® ® Core™ i7/ i5/ i3/ Pentium Generation Intel and Celeron processors (Kabylake-S / Skylake-S) ® in LGA1151 Socket with Intel Q170.

  • Page 8: Features

    MMB501 LGA1151 ATX Motherboard Features ® ® ®  LGA1151 Socket 7 Generation Intel Core™ i7/i5/i3, Pentium and Celeron processors (Kabylake-S/Skylake-S) up to 65W  4 DDR4 2133/2400MHz DIMM with maximum capacity up to 64GB (max. 16GB per slot) ...
  • Page 9 MMB501 LGA1151 ATX Motherboard  Display  One 15-pin D-Sub as VGA connector. Resolution max. up to 1920x1200 @60Hz.  One HDMI 1.4b with resolution max. up to 4096x2160 @24Hz.  One DVI-D with resolution max. up to 1920×1200 @60Hz.
  • Page 10 MMB501 LGA1151 ATX Motherboard This page is intentionally left blank. Introduction...

  • Page 11: Board And Pin Assignments

    MMB501 LGA1151 ATX Motherboard Chapter 2 Board and Pin Assignments Board Layout Board and Pin Assignments...
  • Page 12 MMB501 LGA1151 ATX Motherboard Board Layout (BOTTOM) Board and Pin Assignments...

  • Page 13: Rear I/O

    MMB501 LGA1151 ATX Motherboard Rear I/O A direct contact CPU cooler back plate is not available for MMB501. Note Jumpers/Headers/Connectors CPU Socket for LGA1151(J1) Front Panel Header (CN5) CPU Fan Connector (CN19) System Fan Connector (CN20) Coin battery Socket for RC2032 (BAT1)

  • Page 14: Jumper Settings

    And remove jumper clip from 2 jumper pins to open. The following illustration shows how to set up jumper. Before applying power to MMB501 Series, please make sure all of the jumpers are in factory default position. Below you can find a summary table of all jumpers and onboard default settings.

  • Page 15: Clear Cmos (Jp1)

    MMB501 LGA1151 ATX Motherboard 2.3.1 Clear CMOS (JP1) This jumper (3x1-pin p=2.54mm) allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which includes system setup information such as system passwords.

  • Page 16: Com1 Mode Select (Jp3, Jp5, Jp6)

    MMB501 LGA1151 ATX Motherboard 2.3.3 COM1 Mode Select (JP3, JP5, JP6) Use these jumpers (3x2-pin p=2.54mm) to set COM1 port to operate in RS-232, RS-422 or RS-485 communication mode. Function Setting JP3 1-2 close RS-232 mode JP5 3-5, 4-6 close...

  • Page 17: Com2 Data/Power Select (Jp8)

    MMB501 LGA1151 ATX Motherboard 2.3.6 COM2 Data/Power Select (JP8) The COM2 port has +5V power capability on DCD# and +12V on RI# by setting this jumper (3x2-pin p=2.54mm). Function Setting Power: Set COM2 pin 1 to +5V 1-3 close Data: Set COM2 pin 1 to DCD# (Default)

  • Page 18: Connectors

    MMB501 LGA1151 ATX Motherboard Connectors Signals go to other parts of the system through connectors. Loose or improper connection might cause problems, please make sure all connectors are properly and firmly connected. Here is a summary table showing connectors on the hardware.

  • Page 19: Front Panel Header (Cn5)

    MMB501 LGA1151 ATX Motherboard 2.4.1 Front Panel Header (CN5) This is front panel header (5x2-pin p=2.54mm). Signal PWR LED- SPK- BUZZER- PWRLED+ VCC5 PWRSW- PWRSW+ HW RST- HW RST+ HDD LED- HDD LED+ : The buzzer on motherboard will be active when pin 2 and pin 4 is connected;...

  • Page 20: Mini Pcie Slot With Sim Card Slot (Cn6 & Cn7)

    MMB501 LGA1151 ATX Motherboard 2.4.2 Mini PCIE Slot with SIM Card Slot (CN6 & CN7) Mini PCIE Slot (CN6) Signal Signal PCH_WAKE_ VCC3_DUAL VCC1P5 UIM_PWR UIM_DAT CLKOUT_PCI UIM_CLK CLKOUT_PCI UIM_REST UIM_VPP RF_KILL#_WIFI BUF_PLT_RST_N PCIE_RX_DN VCC3_DUAL PCIE_RX_DP VCC1P5 SMB_CLK_RESUME SMB_DATA_RESUM PCIE_TX_DN...

  • Page 21: Hdmi & Dp Connector (Cn9)

    MMB501 LGA1151 ATX Motherboard 2.4.3 HDMI & DP Connector (CN9) The HDMI (High-Definition Multimedia Interface) is a compact digital interface which is capable of transmitting high-definition video and high-resolution audio over a single cable. Signal Signal DATA2+ DATA2- DATA1+ DATA1-...

  • Page 22: Vga And Dvi-D Connector (Cn10)

    MMB501 LGA1151 ATX Motherboard 2.4.4 VGA and DVI-D Connector (CN10) CN10 is a double-deck connector comprising a lower connector for VGA port and the upper connector for DVI-D port. This is a high rise DVI-D connector provides transmission of fast and high quality video signal between source device (graphic card) and display device (monitor).

  • Page 23: Lan And Usb 3.0 Connectors (Cn11 And Cn12)

    MMB501 LGA1151 ATX Motherboard 2.4.5 LAN and USB 3.0 Connectors (CN11 and CN12) The motherboard comes with two high performance plug and play Ethernet interfaces (RJ-45) which are fully compliant with the IEEE 802.3 standard. Connection can be established by plugging one end of the Ethernet cable into this RJ-45 connector and the other end to a 1000/100/10 Base-T hub.

  • Page 24: Front Audio Header (Cn14)

    MMB501 LGA1151 ATX Motherboard 2.4.7 Front Audio Header (CN14) This is front audio header (5x2-pin p=2.00mm) for convenient connection and control of audio devices. Signal Signal MIC_IN LINE_IN_L LINE_IN_R AUD_OUT_L AUD_OUT_R 2.4.8 Power Input Connectors (CN15 and CN16) Steady and sufficient power can be supplied to all components on the motherboard by connecting power connector.

  • Page 25: Smbus Header (Cn18)

    MMB501 LGA1151 ATX Motherboard ATX1 24-pin power input connector (CN16): CN34 Signal CN34 Signal 3.3V 3.3V 3.3V -12V PS_ON PWR OK 5VSB +12V +12V 3.3V 2.4.9 SMBus Header (CN18) The CN18 (5x1-pin p=2.00mm) is for SMBus (System Management Bus) interface.

  • Page 26: Gpio Header (Cn22)

    MMB501 LGA1151 ATX Motherboard 2.4.11 GPIO Header (CN22) This header (5x2-pin p=2.00mm) is for digital I/O interface. Signal Signal SIO_GPO70 SIO_GPO77 (0xA06 Bit0, H) (0xA06 Bit7, H) SIO_GPO71 SIO_GPO76 (0xA06 Bit1, H) (0xA06 Bit6, H) SIO_GPO72 SIO_GPO75 (0xA06 Bit2, H)

  • Page 27: Internal Usb Headers (Cn17 And Cn24~Cn25)

    MMB501 LGA1151 ATX Motherboard 2.4.13 Internal USB Headers (CN17 and CN24~CN25) The CN17 is Type-A 180D Connector for USB2.0 signal. Signal +5 V_DUAL USB- USB+ These are 5x2-pin p=2.54mm headers, support two USB 2.0 signal for CN24~CN25. Signal Signal +5 V_DUAL...

  • Page 28: Com Headers (Com2~Com6)

    MMB501 LGA1151 ATX Motherboard : Signals of COM1 can be RS-232/422/485 by selecting JP3, JP5 and JP6 (see section 2.3.3). [**] : Pin 1 of COM1 can be DCD/+5V and pin 9 of COM1 can be RI/+12V by Note selecting JP4 (see section 2.3.4).

  • Page 29: Chapter 3 Hardware Description

    The MMB501 Series uses AMI Plug and Play BIOS. System Memory The MMB501 supports four 288-pin DDR4 DIMM sockets for maximum memory capacity up to 64GB DDR4 SDRAMs. The memory module comes in sizes of 2GB, 4GB, 8GB and 16GB.
  • Page 30 MMB501 LGA1151 ATX Motherboard This page is intentionally left blank. Hardware Description...

  • Page 31: Ami Bios Setup Utility

    MMB501 LGA1151 ATX Motherboard Chapter 4 AMI BIOS Setup Utility The AMI UEFI BIOS provides users with a built-in setup program to modify basic system configuration. All configured parameters are stored in a flash chip to save the setup information whenever the power is turned off.
  • Page 32 MMB501 LGA1151 ATX Motherboard Hot Keys Description  Left/Right The Left and Right <Arrow> keys allow you to select a setup screen. The Up and Down <Arrow> keys allow you to select a setup screen or sub  Up/Down screen.

  • Page 33: Main Menu

    MMB501 LGA1151 ATX Motherboard Main Menu When you first enter the setup utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. System Time/Date can be set up as described below.

  • Page 34: Advanced Menu

    MMB501 LGA1151 ATX Motherboard Advanced Menu The Advanced menu also allows users to set configuration of the CPU and other system devices. You can select any of the items in the left frame of the screen to go to the sub menus: ►...
  • Page 35 MMB501 LGA1151 ATX Motherboard  ACPI Settings ACPI Sleep State Select the ACPI (Advanced Configuration and Power Interface) sleep state. Configuration options are Suspend Disabled and S3 (Suspend to RAM). The default is S3 (Suspend to RAM); this option selects ACPI sleep state the system will enter when suspend button is pressed.
  • Page 36 MMB501 LGA1151 ATX Motherboard  AMT Configuration Use this screen to configure AMT parameters. AMT BIOS Features Enable or disable Active Management Technology BIOS features. The default is Enabled. AMI BIOS Setup Utility...
  • Page 37 MMB501 LGA1151 ATX Motherboard  CPU Configuration This screen shows CPU information, and you can change the value of the selected option. Hyper-threading Enable or disable Hyper-threading Technology, which allows a single physical processor to multitask as multiple logical processors. When disabled, only one thread per enabled core is enabled.
  • Page 38 MMB501 LGA1151 ATX Motherboard Turbo Mode Enable/Disable processor Turbo Mode (requires EMTTM enabled too). AUTO means enabled, unless max turbo ratio is bigger than 16 - SKL A0 W/A. C states Enable/Disable CPU Power Management. Allows CPU to go to C states when it's not 100% utilized.
  • Page 39 MMB501 LGA1151 ATX Motherboard Video Controls the execution of UEFI and Legacy Video OpROM. Other PCI devices Determines OpROM execution policy for devices other than Network, Storage, or Video.  Fan Function This screen allows you to select CPU and system fan mode.
  • Page 40 MMB501 LGA1151 ATX Motherboard  Hardware Monitor This screen monitors hardware health status. This screen displays the temperature of system and CPU, cooling fans speed in RPM and system voltages (VCC_CPU, DDR, +12V, +5V and +3.3V). AMI BIOS Setup Utility...
  • Page 41 MMB501 LGA1151 ATX Motherboard  IT8786 GPIO Configuration You can use this screen to set input/output and high/low for each port. AMI BIOS Setup Utility...
  • Page 42 MMB501 LGA1151 ATX Motherboard  IT8786 Super IO Configuration You can use this screen to select options for the Super IO Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 43 MMB501 LGA1151 ATX Motherboard  PCH-FW Configuration This screen displays ME Firmware information. AMI BIOS Setup Utility...
  • Page 44 MMB501 LGA1151 ATX Motherboard  PCI Subsystem settings This screen allows you to set PCI Subsystem mode. PCI Latency Timer Value to be programmed into PCI Latency Timer Register. VGA Palette Snoop Enables or Disables VGA Palette Registers Snooping. AMI BIOS Setup Utility...
  • Page 45 MMB501 LGA1151 ATX Motherboard  Platform Mics Configuration This screen allows you to set Platform Mics Configuration. Native PCIE Enable Bit - PCIe Native * control\n 0 - ~ Hot Plug\n 1 - SHPC Native Hot Plug control\n 2 - ~ Power Management Events\n 3 - PCIe Advanced Error Reporting control\n 4 - PCIe Capability Structure control\n 5 - Latency Tolerance Reporting control.
  • Page 46 MMB501 LGA1151 ATX Motherboard  SATA Configuration During system boot up, the BIOS automatically detects the presence of SATA devices. In the SATA Configuration menu, you can see the currently installed hardware in the SATA ports. SATA Controller(s) Enable or disable the SATA Controller feature. The default is Enabled.
  • Page 47 MMB501 LGA1151 ATX Motherboard  Serial Port Configuration This screen allows you to set Serial Port Configuration. AMI BIOS Setup Utility...
  • Page 48 MMB501 LGA1151 ATX Motherboard  USB Configuration USB Devices Display all detected USB devices. Legacy USB Support Enables Legacy USB support. AUTO option disables legacy support if no USB devices are connected. XHCI Hand-off This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be claimed by XHCI driver.
  • Page 49 MMB501 LGA1151 ATX Motherboard  Utility Configuration BIOS Flash Utility BIOS flash utility configuration. For more detailed information, please refer to Appendix B. AMI BIOS Setup Utility...

  • Page 50: Chipset Menu

    MMB501 LGA1151 ATX Motherboard Chipset Menu The Chipset menu allows users to change the advanced chipset settings. You can select any of the items in the left frame of the screen to go to the sub menus: ► System Agent (SA) Configuration ►...
  • Page 51 MMB501 LGA1151 ATX Motherboard  System Agent (SA) Configuration This screen allows users to configure System Agent (SA) parameters. For items marked with “”, please press <Enter> for more options. Graphics Configuration Open sub menu for parameters related to graphics configuration.
  • Page 52 MMB501 LGA1151 ATX Motherboard  Graphics Configuration Primary IGFX Boot Display Select the video device which will be activated during POST (Power-On Self Test). The default is Auto. Internal Graphics Keep IGFX enabled based on the setup options. AMI BIOS Setup Utility...
  • Page 53 MMB501 LGA1151 ATX Motherboard  Memory Configuration This screen shows system memory information.  PEG Port Configuration This screen shows PEG Port/POE Port feature information. AMI BIOS Setup Utility...
  • Page 54 MMB501 LGA1151 ATX Motherboard Max Link Speed Configure PEG 0:1:0 Max Speed. Detect Non-Compliance Device Detect Non-Compliance PCI Express Device in PEG. AMI BIOS Setup Utility...
  • Page 55 MMB501 LGA1151 ATX Motherboard  PCH-IO Configuration This screen allows you to set PCH parameters. PCH LAN Controller Enable or disable onboard PCH LAN controller. Wake on LAN Enable Enable or disable integrated LAN to wake the system. Restore AC Power Loss Specify what state to go to when power is re-applied after a power failure (G3 state).
  • Page 56 MMB501 LGA1151 ATX Motherboard  USB Configuration This screen shows USB configuration. XHCI Disable Compliance Mode Options to disable Compliance Mode. Default is FALSE to not disable Compliance Mode. Set TRUE to disable Compliance Mode. AMI BIOS Setup Utility...
  • Page 57 MMB501 LGA1151 ATX Motherboard  PCI Express Configuration This screen shows PCI Express configuration. AMI BIOS Setup Utility...
  • Page 58 MMB501 LGA1151 ATX Motherboard PCIe Speed Configure PCIe Speed. ASPM Set the ASPM Level:\nForce L0s - Force all links to L0s State\nAUTO - BIOS auto configure\nDISABLE - Disables ASPM. Detect Non-Compliance Device Detect Non-Compliance PCI Express Device. If enable, it will take more time at POST time.

  • Page 59: Security Menu

    MMB501 LGA1151 ATX Motherboard Security Menu The Security menu allows users to change the security settings for the system.  Administrator Password This item indicates whether an administrator password has been set (installed or uninstalled).  User Password This item indicates whether a user password has been set (installed or uninstalled).

  • Page 60: Boot Menu

    MMB501 LGA1151 ATX Motherboard Boot Menu The Boot menu allows users to change boot options of the system.  Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting.  Bootup NumLock State Use this item to select the power-on state for the keyboard NumLock.

  • Page 61: Save & Exit Menu

    MMB501 LGA1151 ATX Motherboard Save & Exit Menu The Save & Exit menu allows users to load your system configuration with optimal or fail-safe default values.  Save Changes and Exit When you have completed the system configuration changes, select this option to leave Setup and return to Main Menu.
  • Page 62 MMB501 LGA1151 ATX Motherboard  Discard Changes Select this option to quit Setup without making any permanent changes to the system configuration. Select Discard Changes from the Save & Exit menu and press <Enter>. Select Yes to discard changes. ...

  • Page 63: Appendix A Watchdog Timer

    MMB501 LGA1151 ATX Motherboard Appendix A Watchdog Timer About Watchdog Timer Software stability is major issue in most application. Some embedded systems are not watched by human for 24 hours. It is usually too slow to wait for someone to reboot when computer hangs.
  • Page 64 MMB501 LGA1151 ATX Motherboard This page is intentionally left blank. Watchdog Timer...

  • Page 65: Appendix Bbios Flash Utility

    Please read and follow the instructions below carefully. In your USB flash drive, create a new folder and name it “Axiomtek”, see figure below. Copy BIOS ROM file (e.g. MMB501.005) to “Axiomtek” folder.
  • Page 66 Select the USB drive containing BIOS ROM file you want to update using the <> or <> key. Then press <Enter> to get into “Axiomtek” folder. Now you can see the BIOS ROM file on the screen, press <Enter> to select.
  • Page 67 MMB501 LGA1151 ATX Motherboard Please wait while BIOS completes the entire flash update process: erase data, write new data and verify data. 10. When you see the following figure, press <Enter> to finish the update process. After that the system will shut down and restart immediately.

Table of Contents