I Starting A Cleaning Cycle - Zodiac Vortex GV 33 Series Installation And User Manual

2.5 I Starting a cleaning cycle

In order to avoid any risk of injury or material damage, please follow the instructions below:
• Bathing is prohibited when the appliance is in the pool.
• Do not use the appliance during a shock chlorination. Wait until the chlorine level has reached
the recommended value before immersing the cleaner.
• Do not use the appliance if the roller shutter is closed.
• When the control box is powered up, the following symbols light up to indicate:
- The action in progress
- The cleaning mode selected
- Maintenance required
• The control box switches to standby after 10 minutes, the screen and the LEDs are switched off. Press any key to exit
standby mode. Standby mode does not stop the appliance if it is in a cleaning cycle.
2.5.1 Cleaning mode selection (depending on model)
• A cleaning cycle is already configured by default: the symbols are on and the cleaning time appears on the screen, for
example: (depending on the model).
• The cleaning cycle can be selected at any time, before the appliance starts or while it is operating. The new cycle will
be launched instantly and the remaining time countdown will be reinitialised.
• The cleaner adapts its movement strategy depending on the choice in order to optimise coverage.
Surface to be cleaned
Bottom only
Bottom + walls + water line
Water line only
• Press to start the cleaning cycle.
Tip to improve cleaning performance
At the start of the bathing season, launch several cleaning cycles in bottom only mode (after removing the
large debris with a net).
Regular use of the cleaner (without exceeding 3 cycles per week) means that your pool will always be clean
and the filter less clogged.
2.5.2 Adjusting the cleaning time (depending on model)
• You may reduce or increase the time for the cleaning cycle selected or in progress:
- : Reduce by 30 minutes.
- : Increase by 30 minutes.
• Press to confirm.
11
Pool shape
Other shapes, other bottoms
Flat bottomed rectangular
Cleaning intensity
Low intensity
Intensive