I Starti Ng The Cleaning Cycle - Zodiac TornaX Instructions For Installation And Use Manual

3.5 I Starti ng the cleaning cycle

To prevent risk of injury or property damage, be sure to adhere to the following:
• Bathing is prohibited when the appliance is in the pool.
• Do not use the appliance during shock chlorinati on.
• Do not leave the appliance unatt ended for an extended period.
• Do not use the appliance if the roller shutt er is closed.
3.5.1 Launching the cleaning cycle
• Press and release
• The appliance starts the cleaning cycle in "bott om only" or "bott om + walls" mode (depending on the model).
• Press and release
Tip to improve cleaning performance
Regular use of the cleaner (without exceeding 3 cycles per week) means that your pool will always be clean
and the fi lter less clogged.
3.5.2 The cleaner rears up during certain rotati ons
• The more grip on the surface of the lining, the more the robot will tend to rear up.
, the LED lights up.
to select the "bott om only" or "bott om + walls" mode (depending on the model).
EN
8