I Starting The Cleaning Cycle - Zodiac TornaX Genius Installation And User Manual

3.5 I Starting the cleaning cycle

To prevent all risks of injury or equipment damage, comply with the following directives:
• Bathing is prohibited when the appliance is in the pool.
• Do not use the appliance during shock chlorination.
• Do not leave the appliance unattended for an extended period.
• Do not use the appliance if the roller shutter is closed.
3.5.1 Launching the cleaning cycle
• Press and release
• The appliance starts the cleaning cycle in "floor only" or "floor + walls" mode (depending on the model).
• Press and release
Tip to improve cleaning performance
Regular use of the cleaner (without exceeding 3 cycles per week) means that your pool will always be clean
and the filter less clogged.
3.5.2 The cleaner rears up during certain rotations
• The more grip on the surface of the lining, the more the robot will tend to rear up.
, the LED lights up.
to select the "floor only" or "floor + walls" mode (depending on the model).
EN
9