Table of Contents
Related Manuals for enorossi RAKE CADDY Series
Summary of Contents for enorossi RAKE CADDY Series
- Page 1 Important: Read all the operating and maintenance instructions in this manual before using or operating the device in any way (EC Machinery Directive 98/37) PULL TYPE RAKE RAKE CADDY series USER AND MAINTENANCE MANUAL rev 0 - 05/09...
- Page 2 Others are specified in the technical file. All rights are reserved. It is forbidden to reproduce any part of this manual in any way without the explicit written authorization of ENOROSSI. The content of this manual may only be modified by the manufacturer and without forewarning...
-
Page 3: Table Of Contents
user and maintenance manual CONTENTS INTRODUCTION ....................5 ............... 5 BOUT SIDE DELIVERY RAKES ..................5 BOUT THE MANUAL ............5 CERTIFICATION AND IDENTIFICATION ............. 6 AIN COMPONENTS AND TECHNICAL DATA ....................7 ARRANTY SAFETY ....................... 8 ..................8 ENERAL RULES .. - Page 4 user and maintenance manual...
-
Page 5: Introduction
Italian. A2 About the manual Symbols used in this manual: The ENOROSSI firm (the “Manufacturer”) designed and created the device IMPORTANT in accordance with the associated safety standards to ensure the safety of The operator must take the respective information into personnel and the entire operating system. -
Page 6: A4 Main Components And Technical Data
user and maintenance manual The power capacity of the tractor (Kw); 5. Fixed frame The overall weight (kg); 6. Foot support The year of manufacture. 7. Hydraulic quick couplings 8. Tractor hitch You must have this information at hand when requesting assistance and 9. -
Page 7: A5 Warranty
Warranty are replaced by the complied with; Enorossi firm at no charge and at its own premises. – If the components cannot be replaced at its premises, the Manufacturer will return the •... -
Page 8: Safety
User and maintenance manual SAFETY IMPORTANT Do not forget that, for transportation and handling, the rake must be in its transport configuration as described in the chapter “Moving the B1 General rules rake”. This manual describes the safety regulations to be followed when using the rake. - Page 9 user and maintenance manual • Moving the rake: this is a trailed rake so must be hitched to the back b. Check the fixed frame to ensure the two (optional) hydraulic of an agricultural tractor. The complete vehicle (the tractor with rake) does not require any luminous or acoustic signalling devices or panels Rubinetti idraulici when used in cultivated fields.
-
Page 10: B3 The Operator's Responsibilities And Safety
user and maintenance manual d. Lastly, attach the two tool carriers by chaining together their The rake's technical characteristics must also not be altered in any respective supports (as illustrated). way to modify performance, otherwise the warranty will be forfeited immediately and the Manufacturer will refuse all responsibility. - Page 11 user and maintenance manual Risk of crushing and/or cutting upper limbs: if you need to operate The Manufacturer assumes no liability for: in the area of this pictogram while the tractor is running, you should take all necessary precautions and wear protective gloves. Improper or incorrect use of the rake device that can cause harm to persons and animals or damage to objects and the actual rake;...
-
Page 12: B3 Noise Levels
User and maintenance manual INSTALLATION IMPORTANT Warning labels and pictograms must be replaced if they become faded and risk becoming illegible. In this case, the operator must not use the rake until C1 Rake assembly any faded labels are replaced with new ones. It is also strictly forbidden to As mentioned above, the rake is fully dismantled for delivery to the remove the pictograms and labels from the equipment. -
Page 13: C3 Hydraulic Connections
user and maintenance manual C5 Storing the rake When the tractor is near the rake’s attachment, turn the lever on the foot support (2) to raise or lower the rake’s attachment and bring it parallel with The Customer must set aside a large and easily accessible area on his that on the tractor. -
Page 14: Operation And Use
User and maintenance manual OPERATION and USE c. Start up the tractor and use the control lever for the auxiliary hydraulic circuit (in the cabin) to lower the rake’s moveable frames D1 Preliminary information to the point where the teeth of the wheels are about 30-40 cm Suitable and optimal use of the rake not only helps avoid accidents but is above the ground. -
Page 15: D2.1 Adjusting The Inclination Of The Wheels
user and maintenance manual larghezza di lavoro larghezza di lavoro Foro impegnato Telaio mobile Telaio mobile n° 7 To swath, spread or turn over forage or similar, the star wheels must Telaio fisso Telaio fisso be slightly inclined and the arms turned on their axes. Instructions are given below. - Page 16 user and maintenance manual • Spreading: this allows you to • spread and turn existing swaths, Turning: this allows you to turn as illustrated. If the rake has swaths, as illustrated. If the rake been set up for swathing (as has been set up for spreading (as described previously), you will described...
-
Page 17: D2.3 Adjusting The Springs
user and maintenance manual D2.3 Adjusting the springs Check for any people or animals in the immediate vicinity before boarding the tractor; if there are, ask them to move to a safe distance. The wheels and their teeth conform to the Sit in the driver’s seat, start up the tractor, release the parking brake ground according to the pressure of the and you can then start work. -
Page 18: Maintenance
User and maintenance manual MAINTENANCE E2 Scheduled maintenance Scheduled maintenance is purely informative and depends on normal operating conditions. It may therefore differ in relation to the type of E1 Maintenance instructions service, working environment (which may be dusty), the season, etc. The Manufacturer has drawn up a rake maintenance schedule based on Maintenance should be stepped up the tougher the machine’s operating functional tests. -
Page 19: E4 Replacing A Wheel And/Or Its Teeth
user and maintenance manual E4 Replacing a wheel and/or its teeth: air in the hydraulic If you need to replace a wheel, circuit. fully undo the six retainer nuts (1), undo the respective screws (5) and remove the wheel from its coupling (or hub). - Page 20 user and maintenance manual MAINTENANCE - 20...
- Page 21 User and maintenance manual Il servizio di assistenza e ricambi della ENOAGRICOLA ROSSI srl è a Vostra disposizione. Per ordinare i ricambi fotocopiare la presente pagina, compilarla con i dati richiesti ed inviarla per posta o fax a: ENOAGRICOLA ROSSI srl – 06010 Calzolaro di Umbertide - Perugia - Italia Tel.
- Page 22 user and maintenance manual Table 1 MAINTENANCE - 22...
- Page 23 Table 1 4010905...
- Page 24 Table 2 ENOAGRICOLA ROSSI s.r.l. 06018 Calzolaro di Umbertide Perugia Italia Tel. (39) 075-930 22 22 - Telefax (39) 075-930 23 28 e-mail: enorossi@enorossi.it – info@enorossi.it Website: http://www.enorossi.it - http://www.enoagricolarossi.com MAINTENANCE - 24...
- Page 25 user and maintenance manual Table 2 MAINTENANCE - 25...
- Page 26 user and maintenance manual Table 3 MAINTENANCE - 26...
- Page 27 user and maintenance manual Table 3 MAINTENANCE - 27...
- Page 28 user and maintenance manual Table 4 MAINTENANCE - 28...
- Page 29 user and maintenance manual Table 4 MAINTENANCE - 29...
- Page 30 user and maintenance manual Table 5 MAINTENANCE - 30...
- Page 31 user and maintenance manual Table 5 MAINTENANCE - 31...
- Page 32 user and maintenance manual MAINTENANCE - 32...
Need help?
Do you have a question about the RAKE CADDY Series and is the answer not in the manual?
Questions and answers