AVer EVC Quick Manual page 5

3. Press "LAN Configuration".
4. And In the drop-down list "Obtain IP address", choose "Static IP" or "PPPoE".
Static IP: Input the "IP address", "Subnet Mask" and "Default Gateway".
‐
PPPoE: Input the PPPoE login "User name" and "Password".
‐
Static IP setting
5. Select "Apply" and press (Enter).
6. Press "Home" on the remote to return to the home menu.
7. Press the (Call) button on the remote and you are ready to make your first call.
Scenario 2 –Private IP Configuration (Behind Firewall with Port Forwarding)
Your EVC is connecting to the internet through a firewall.
1. From the remote press "Home"->
"Setting".
PPPoE setting
-> 2. Press -> "Network".
3. Press "LAN Configuration".
4. And In the drop-down list "Obtain IP address", choose
"Static IP".
5. Manually input the "IP address", "Subnet Mask" and
"Default Gateway".
6. Select "Apply" and press
7. Press
menu. (If you have H.323 ALG enabled, skip to step 10).
8. In the same page, go to "Firewall" and press
9. Select "ON" in the NAT Configuration check box and
enter the IP address in the "NAT Public (WAN) Address"
field.
10. Press the "Home" button on the remote to return the
home menu.
11. Press the
ready to make your first call.
Scenario 3 – H.460 Gatekeeper with Firewall Traversal
Your EVC is connecting to the internet through a firewall and you have a Gatekeeper outside the firewall.
1. From the remote press "Home"->
"Setting".
English-3
(Enter).
(Back) on the remote to return to previous
(Enter).
Call button on the remote and you are
-> 2. Press -> Network"