Chapter 2 - System Description - Garnet SEELEVEL II Manual

CHAPTER 2 - SYSTEM DESCRIPTION

T
he S
L
EE EVE
and sender panels that stick to the side of the holding tank. A single
2 conductor wire is used to connect all the sender panels to the display.
The S L L II Tank Monitoring
EE EVE
system consists of a display unit
that mounts inside the RV.
The Sender
Each sender panel is a flexible self-adhesive printed circuit board which is
adhered to the side of the holding tank. The sender panel can be cut to
length to match the height of the tank, and it auto-calibrates itself so that
it can read from empty to full regardless of the height of the tank. Three
different sender options (710JS, 710ES, and 710SS) are available with the
ability to double-stack the senders to provide accurate level measurement
for tank heights ranging from 4
The Display
The display receives the information from the three sender panels via a
single 2 conductor wire and shows the level information in percent of full
on a 3-digit LED display. When the button for a particular tank is pressed,
the display shows the level for that tank.
Page 4
consists of a display unit that mounts inside the RV,
TM
L II
The
S L L II
EE EVE
S EE L EVE L II TANK MONITOR
BATT FRESH GREY BLACK LPG
Grey water Black water
holding tank holding tank
RV Tank Monitoring System
EE S L EVE L II TANK MONITOR
BATT FRESH GREY BLACK LPG
Fresh water
LPG tank
holding tank
to 34".
1/2"
709-N2K NLP/709-N2KP NLP Manual
710-ES
Sender panels affix to
the outside of the
holding tank.
710-JS
Three sender size options are available
to measure a variety of tank heights.
S L L II TANK MONITOR
EE EVE
BATT FRESH GREY BLACK
710-SS
SS
A second display
can be installed in
the service bay
with the holding
LPG tanks.