Nexcom ICES 675 User Manual page 35

Chapter 3: BIOS Setup
Trusted Computing
This section is used to configure Trusted Platform Module (TPM) settings.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Configuration
Security Device Support [Enable]
NO Security Device Found
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Security Device Support
Enables or disables BIOS support for security device. O.S will not show
Security Device. TCG EFI protocol and INT1A interface will not be available.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
SMART Settings
This section is used to configure the SMART feature for hard drives.
Enables or Disables BIOS
support for security device.
O.S. will not show Security
Device. TCG EFI protocol and
INT1A interface will not be
available.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
SMART Self Test
Enables or disables SMART self test on all hard drives during POST.
22
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
SMART Settings
SMART Self Test [Enabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Run SMART Self Test on all
HDDs during POST.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
ICES 675 User Manual