Advertisement
SECURING
REAR
1. Attach shoulder belt pin
connector to pin on wall side lap
belt, then secure seatbelts onto
the storage pin under flip-up
seat
.
2. Backup wheelchair to park zone
3. Pull paddle handle
to release
rear retractors and activate
XPress Timer.
4. Attach both rear J-hooks to rear
wheelchair frame
.
5. Backup wheelchair within park
zone
and against side bumper
or closest proximity.
FRONT
6. Attach front J-hook to front
wall side wheelchair frame
For scooters, loop J-hook around
front wheel frame, and then
insert J-hook (facing out) through
O-ring
G
.
7. Pull down tension handle
tension front J-hook
.
Do not over tension J-hook.
8. Lock wheels
or power off chair.
SEATBELTS
9. Extend shoulder belt and wall
side lap belt across occupant's
shoulder and hip
; then buckle
them to the aisle side lap belt
Buckled seatbelts should
be against occupant's
hipbone
.
10. Occupant and wheelchair are
secured and ready to go.
OPERATING INSTRUCTIONS
.
.
H
F
K
to
.
IMAGES
A
C
D
E
park zone
B
ex: J-hook tie-down
J
F
wheelchair
scooter
L
M
N
P
RELEASING
SEATBELTS
1. Detach shoulder belt pin connector
from pin on lap belt
2. Unbuckle lap belt
all seatbelts in storage.
If needed, press seatbelt
release button
FRONT
3. Pull down
and turn tension
handle
, then return tension
handle to the vertical position
to release front J-hook
tension
.
4. Remove front J-hook from
wheelchair frame
Place J-hook in storage ring
5. Unlock wheels
chair.
REAR
6. Pull paddle handle
G
rear retractors and activate
XPress Timer.
7. Move wheelchair forward, remove
rear J-hooks from rear wheelchair
frame and place J-hooks in
storage
.
8. Occupant and wheelchair are
released and ready to go.
.
and place
.
or scooter
.
.
or power on
to release
Advertisement
